Residual discharge head of concentric pipes 0.85 m
Residual discharge head of separate pipes 0.5 m
Residual discharge head of boiler without pipes
Concentric flue gas outlet pipes
Diameter
Maximum length
Losses for a 45°/90° bend
Hole in wall (diameter)
Concentric flue gas outlet pipes
Diameter
Maximum length
Losses for a 45°/90° bend
Hole in wall (diameter)
Twin flue gas outlet pipes
Diameter
Maximum length
Losses for a 45°/90° bend
Forced open installation B23P-B53P
Diameter
Maximum discharge tube length
Nox
Emission values at maximum and minimum output (**)
Maximum
CO s.a. less than
CO2 (***)
NOx s.a. lower than
T flue gases
Minimum
CO s.a. less than
CO2 (***)
NOx s.a. lower than
T flue gases
(*) average value between various hot water operation conditions
(**) check performed with concentric pipe Ø 60-100, length 0,85 m. - water termperature 80-60°C
The data indicated must not be used to certify the system; for certification, use tha data indicated in the "System handbook" measured during first ignition.
(***) CO
tolerance = +0.6% -1%
2
(+) The installation of this product is allowed only in the destination Countries contained in the data plate, regardless of the present translation language.