Mitsubishi Electric ZENSHIN Ecodan QAHV Setup Manual page 8

*1 Set to "1" when individual system and connected to AE-200.
*2 Set to "3" when using all modes (Mode 1,2, and 3).
Set to "2" when using mode 1 and mode 2.
Set to "1" when using mode 1.
*3 Only Six-sensor method
*4 Required only when AE-200 is connected.
*5 It can also be set with the PAR-W31MAA or AE-200.
*6 When secondary control is enabled.
8