Country of origin: United Kingdom – Japan – Thailand – Malaysia. ©Mitsubishi Electric Europe 2011. Mitsubishi and Mitsubishi Electric are trademarks of Mitsubishi Electric Europe B.V. The company reserves the right to make any variation in technical specification to the equipment described, or to withdraw or replace products without prior notification or public announcement.
Introduction to Your New Mitsubishi Electric Ecodan System This booklet has been created to enable you to quickly personalise the Heating System controls to provide the best operation conditions for your home. If you require more in depth information and system settings please refer to the instruction booklet provided with the cylinder unit.
How to run your system efficiently electricity is used by the Air Source Heat Pump to The Ecodan provides water at a lower temperature than the gas or heat refrigerant to a high temperature. This heat is oil fired boiler you may be used to. This means that you may notice then transferred to water which flows into your home some differences between this system and ones you have used before.
Customising Controller Settings For Display Your Home Settings To change the settings of your heating system please use the main controller located on the front panel of the cylinder unit or on a wall. The following is a quick guide to viewing the main settings.
General Operation Viewing System Settings This screen shows the target temperature, space heating mode, To access the main settings menu, press button B ‘MENU’. DHW mode any additional heat sources being used, holiday mode, and the date and time. The following menus will be displayed: Home Screen - DHW (Domestic Hot Water) Use the function buttons to...
Ecodan in cold weather This is warm air being blown from the Heating system does not get Ecodan to ensure the internal parts don’t up to set temperature freeze. It is known as the defrost cycle. Prohibit, schedule or holiday mode selected: Normal operation, no action necessary.