Mitsubishi Electric ZENSHIN Ecodan QAHV Setup Manual page 58

Function setting
* When setting the set temperature for Mode 1, Mode 2, or Mode 3 to 65ºC or higher, the setting for
Function No.21 is required.
* This setting will be used for the secondary side outlet hot water temperature when the secondary side
control is enabled.
Operation status monitoring
Check the running information of each unit from the remote controller.
015 Mode 1 differential value (Schedule value)
016 Mode 2 differential value (Schedule value)
017 Mode 3 differential value (Schedule value)
021(*) Outlet hot water temperature setting
Select "Running information" from the main menu screen and press
the [Select] button.
Set the desired M-NET address with the [F2] and [F3] buttons and
press the [Select] button.
Item
58