Signal Strength Test (Menu 4) - Cooper Scantronic 770r Manual

Signal Strength Test (Menu 4)

1. Press SELECT until menu 4 appears
on the LEDs:
2. Press SET.
The LEDs show the strength of the
last signal the Module received in
each channel as follows:
Starting with channel 1, the LED for
the channel first flashes six times,
then a number of blue LEDs light up
at the same time to indicate the sig-
nal strength. The more LEDs alight,
the stronger the signal.
The Module carries out this cycle
for all the channels occupied by
transmitters.
3. Press the lid tamper button to clear
the display.
4. Trigger a radio transmitter. (You can
trigger a transmitter at any time and
the display updates itself.)
The LEDs show the strength of the
x6
x6
latest transmission.
5. Press ESC/DEL to leave the signal
x6 strength display and show menu 4.
x6
x6
x6
x6
18
x6
x6
x6