Getting Started; Unpacking Relax; Connecting The Power Supply - Sonoro RELAX SO-811 Operating Instructions Manual

3

Getting started

3.1

Unpacking RELAX

1. Take RELAX out of the packaging and check whether RELAX or the individual
parts are damaged. If this is the case, do not use RELAX. Should you detect
any damage, contact your dealer or sonoro audio GmbH customer support
immediately.
2. Check to make sure that the delivery is complete (see chapter "Scope of
delivery").
3. Place RELAX in a suitable location. If you want to put your RELAX on a natural
wood surface, please make sure that it is suitable. Oiled or waxed surfaces
may cause stains.
4. Remove the protective film from the display.
3.2

Connecting the power supply

1. Plug the power adapter vertically into the contact pins of the power supply.
2. To remove the power adapter, press the release button and pull out the power
adapter.
3. Insert the connector of the power adapter into the DC power input jack on the
back of RELAX.
4. Insert the power plug into a wall socket. RELAX is turned on.
78 © sonoro audio GmbH 2022