1.0 Introduction
The Labnet VorTemp™ 1550 shaking incubator is designed for simultaneous heating and mixing of small samples. It replaces
two devices, reducing both time and space needed. It is suitable for biochemistry, microbiology, and clinical laboratories in which
applications require temperature and shaking treatment.
1.1 Symbols and Conventions
CAUTION: This symbol refers you to important operating and maintenance (servicing) instructions within the product
Instruction Manual. Failure to heed this information may present a risk of damage or injury to persons or equipment.
CAUTION: To avoid accidental bodily harming or burning be very careful touching the metal parts of the unit. It can be
very hot after it is used at high temperatures. Allow the metal parts to cool down before handling.
This symbol indicates the presence of a potential hazard which could result in electrical shock.
2.0 Packing
The Labnet VorTemp 1550 shaking incubator includes the following components:
VorTemp 1550 shaking incubator
Platform for 15 mL microtubes
Platform for 50 mL microtubes
Instruction manual
3 .0 Specifications
Power
Heater Power
Motor Power
Electrical
S2050A
S2050A-230V
Fuse
S2050A
S2050A-230V
Environmental Temperature
Relative Humidity
RPM Regulation
Shaker Orbit
Temperature Operating Range
Temperature Sensor
Heat up Time
Temperature Uniformity
Timer
Maximum Capacity
Dimensions (W x D x H)
Weight
NOTE: The supply cord shall be with PE conductor and cross section at least 3 x 1.00 mm
515W
500W
15W
120V ±10%, 50/60Hz, 4.8A
230V ±10%, 50/60Hz, 2.4A
2 x T 6.3A L 250V
2 x T 3.15A L 250V
From 5°C to 40°C
Up to 85% non-condensing
Digital load independent, from 100 to 900 rpm in 10 rpm steps
3 mm
From 5°C above room temperature to 99.5°C
PT100
Approx. 5°C/min.
±0.5°C
From 30 sec. to 99 min. 50 sec. in 10 sec. steps, under 10 min. in 1 sec. steps, timer HOLD function
8 x 50 mL tubes or 18 x 15 mL tubes
10 x 13 x 12 in. (26.5 x 32.5 x 30.5 cm)
25 lbs. (11.5 kg)
or 3 x AWG 18 (USA/CANADA).
2
Instruction Manual
|
1