Klarstein FUTURELIGHT SMART Manual page 36

EN
36
Start point
Pass the wire ropes through the screws on the bracket. Adjust the length of the
ropes to the marking line and fix them with the securing pins.
5
Measure the length of the
wire ropes (L) and refer to
the dimension given under
'Dimensions': L = X-Y-26 (mm).
Mark a line on the wire ropes.
Note: The extractor hood
should be installed at a height
of 65-80 cm (gas) or 60-80 cm
(electric cooker) above the
starting point of the hob. If a
larger minimum distance for
cooker hoods is specified in the
operating instructions of the
cooker, this minimum distance
and not the one mentioned
above must be observed.
6
Wire rope
Locking pin
M4 screw