Klarstein FUTURELIGHT SMART Manual page 46

EN
46
3
Loosen the 8 screws.
Replacing the activated carbon filter
• The activated carbon filter should only be used if you want to use the unit in
recirculation mode.
• The activated carbon filter cannot be cleaned or reprocessed and should
generally be changed every 4 months.
Inserting the activated carbon filter
Note: Always state the model and serial number when reordering activated
carbon filters. This information can be found on the type plate on the inside
of the unit.
4
Insert the new LED lighting.
Mount one activated carbon
filter on the left and one on
the right side so that the
plastic grids protecting the
fan wheel are covered, as
shown in the illustration.