Cleaning And Maintenance - Klarstein FUTURELIGHT SMART Manual

Troubleshooting connection problems
If your Klarstein device cannot be found in the WLAN, check the following:
• Is the device plugged in?
• Is the WiFi feature of my phone enabled?
• Is the WiFi function of the Klarstein device activated? (Follow the instructions
in the app)
• Has the WLAN password been entered correctly?
• Are the router, Klarstein device and smartphone in the immediate vicinity
during the connection attempt? (Ideally no more than 5 m apart)
• If you have deactivated the 2.4 GHz band in the settings of your wireless
router, activate it in your router settings.
Note: For further help, follow the instructions in the app when setting up the
connection.

CLEANING AND MAINTENANCE

Cleaning instructions
Note: The outer surfaces are very sensitive. Take extreme care when cleaning to
avoid scratches and abrasions. Follow the cleaning instructions to achieve the
best results without damaging the cooker hood.
• Switch off the extractor hood and pull the plug out of the socket before
cleaning and maintenance.
• Clean the outer surfaces of the cooker hood with a damp cloth and a solution
of water and mild detergent. Do not use abrasive cleaners. Use a soft cloth for
cleaning to avoid scratches. If the outer surfaces are still damp after cleaning,
rub them with a dry cloth.
• Never use corrosive, abrasive or flammable cleaning agents or products
containing bleach.
• Never insert sharp objects into the protective cover of the motor.
• Always clean the control panel and filter cover with a damp cloth and mild
detergent only.
• It is extremely important to clean the appliance regularly and replace the
filters at the recommended intervals. Failure to observe this will result in
grease deposits which can cause a fire.
• Clean the appliance regularly after use to remove all residues from cooking,
especially residues from acidic fruits, yoghurt and milk-based products.
EN
43