Table of Contents
Advertisement
CD Playback Programming
This function allows the tracks to be played in a programmed sequence.
Program can only be set in STOP mode.
1. Tap the PRESET/MEMORY Button on main unit or MEMORY Button on remote control, display will show
program track number "P0l" and memory icon "PROG" will be ashing in the LED display.
2. Use the ior •1 Button on main unit or remote control to select the desired track. The track number will be
shown in display.
3. Tap the PRESET/MEMORY Button on main unit or MEMORY Button on remote control to store the selected
track in the memory, the next program number will advance one (i.e."P02") in LED
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 32 Display will show "FULL"
after 32 tracks have been programmed.
5. Tap the ►11 Button on main unit or remote control to start playing the CD or MP3 CD in the programmed
sequence.
. Press the REPEAT Button (".)on remote control to select Repeat 1/AII if
7. To stop playing, press the STOP Button on main unit or remote
. To cancel the program play, press the STOP Button on main unit or remote control twice, "PROG" icon
disappears from display.
Bluetooth Operation
In Off (standby) mode, press the POWER/ STANDBY BUTTON on top of the
main unit or on the remote control to turn the unit ON and follow the directions below to connect via
Bluetooth.
PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHER BLUETOOTH
ENABLED DEVICE to the Okcastle HIFl100
The never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link
the with your Bluetooth device.
1. In Off (standby) mode, press the POWER/ STANDBY BUTTON C) on top ofthe main unit or on the remote
control to turn the unit ON.
2. Tap the MODE Button to select Bluetooth mode, "PAIRING" message running in LED display is in search
mode
3. The has never been paired with a Bluetooth device before or cannot nd
the last paired device, the running message "PAIRING" on LED will indicate the search mode. You need to
follow the pairing instructions below to link your Bluetooth device.
Turn on the Bluetooth function of your Bluetooth device and enable the
Select" Okcastle HIFI100 "from the device list when it appears on your device screen.If required, enter the
pass code "0000" to pair (link) the your device.
1. After successfully pairing (linking), display will change to show "BT AUDIO" steadily. You can begin playing
music from your Bluetooth device wirelessly to the speaker.
2. S. After selecting your favorite song, press PLAY/PAUSE►/11Button on the unit or remote control to play
or pause the song.
3. Press the volume control on main unit or remote control to adjust to the desired volume level.
4. Press or Button on main unit or remote control to skip to previous or next song.
5. If you want to pair another Bluetooth enabled device, press and hold the
BT PAIR Button on remote control or PAIRING button on main unit for 2 seconds or turn off the Bluetooth
function of device currently paired then repeat step 3 above.
Advertisement
Table of Contents
