Table of Contents
Advertisement
Instructions Guide
Bluetooth Operation
Select and press
mode is selected, indicated by a flashing blue light.
Using the native controls on your Bluetooth device, select the "Majority
DX20" when prompted to choose a Bluetooth device.
When successfully paired and connected, a beep will be heard from the
When successfully paired and connected, a beep will issue from the unit
unit and the Pairing Indicator will display a solid blue light. After initial
and the Pairing Indicator will display a solid blue light. After initial pairing,
pairing,the unit will stay paired unless unpaired manually by the user, or
the unit will stay paired unless unpaired manually by the user, or until the
until the device is reset.
device is reset.
To unpair, hold down the PAIR button for 3 seconds. You can now pair the
device with another Bluetooth device.
If your device should become unpaired or you find it is unable to connect,
Ensure all audio cables are properly connected before inserting the power
In case your device will disconnect from DX20, or if you are unable to
connect please start over again following the paring steps again.
repeat the steps above.
cable into the mains socket.
10
a beep will be heard
button on the Subwoofer until Bluetooth
iPad/Mobile phone
Advertisement
Table of Contents
