Advertisement

Quick Links

Box Contents
1. 1x HiFi100
2. 1x Remote Control
3. 1x Mains Power Cable
(https://www.majority.co.uk/wp-content/uploads/2022/11/HIFI100-Giftbox-EU.png)
Controls and Functions
Top View/Control Buttons
(https://www.majority.co.uk/wp-content/uploads/2022/11/Hi -100-Top.jpg)
1. Volume down (-) button
2. Volume UP (-) button
3. Power/Standby button
4. Mode button
5. Clock button
. Sleep button
7. CD Repeat/ Random button FM/Mono/Stereo button
. Memory button/ FM preset button
9. CD stop button Bluetooth pair button
10. CD/Bluetooth Play/Pause button
11. CD open/close button
12. CD/Bluetooth Skip Previous FM tune – button
13. CD/Bluetooth Skip Next FM tune + button
14. Aux in Jack
15. DC in jack
1 . FM wire antenna
 

Advertisement

Table of Contents
loading

Summary of Contents for MAJORITY 1000002841

  • Page 1 1. 1x HiFi100 2. 1x Remote Control 3. 1x Mains Power Cable (https://www.majority.co.uk/wp-content/uploads/2022/11/HIFI100-Giftbox-EU.png) Controls and Functions Top View/Control Buttons (https://www.majority.co.uk/wp-content/uploads/2022/11/Hi -100-Top.jpg) 1. Volume down (-) button 2. Volume UP (-) button 3. Power/Standby button 4. Mode button 5. Clock button .
  • Page 2     Front View/Control Buttons (https://www.majority.co.uk/wp-content/uploads/2022/11/Hi 100-Front.jpg) 17. Right/Left Speakers 18. Remote Sensor 19. LED Display  ...
  • Page 3 Remote Control (https://www.majority.co.uk/wp-content/uploads/2022/11/Hi 100-remote.jpg) 1. CD Open/Close button 2. CD/Bluetooth skip previous 3. Play/Pause button 4. CD repeat button 5. CD random button . Clock button 7. Sleep button . Mode button 9. Snooze button 10. Volume down (-) button 11.
  • Page 4: Instructions Guide

      Instructions Guide Standby Mode Standby Mode is when the unit is rst plugged into an AC power source (display ashes and shows 00:00) or after all the settings have been made and the time is showing on the display. Standby mode is also enabled when the Button is pressed and all functions (Bluetooth/Radio/CD/AUX) are off, no buttons are pressed and no alarms are sounding.
  • Page 5: Alarm Operation

    Alarm Operation SETTING THE ALARM CLOCK This feature allows the system to turn on automatically and wake you using a beeping alarm, the CD or the RADIO. 1. In standby mode, press and hold the ALARM Button in on remote control, Hour digits of alarm clock start ashing.
  • Page 6: Preset Radio Stations

    scan and then release the button. The tuner will stop scanning when it receives the next broadcasting station of adequate signal strength. 5. Press the volume control VOLUME+/- Button on main unit or remote control to adjust the volume to the desired level.
  • Page 7: Skip And Search Mode

    PLAY/PAUSE ►11 Button again. 9. indicate the correct track number selected. 10. To locate a particular section within a track, press and hold the 1•or 1 Button until the section is found. Release the button to continue playing your selection 11.
  • Page 8: Bluetooth Operation

    CD Playback Programming This function allows the tracks to be played in a programmed sequence.  Program can only be set in STOP mode. 1. Tap the PRESET/MEMORY Button on main unit or MEMORY Button on remote control, display will show program track number “P0l”...
  • Page 9 Auxiliary Operation This unit features an auxiliary audio signal input jack for connecting external audio devices like MP3 players, Digital Audio Device and listen to them through the speakers of this unit. 1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable. 2.
  • Page 10: Warranty

          Warranty Register your Majority product (https://www.majority.co.uk/register/) within 30 days of purchase to activate your extended 3 Year Warranty. Gain access to all the bene ts and lifetime technical support (see our Extended Warranty (https://www.majority.co.uk/returns-warranty/) details for more info).
  • Page 11: Recycling Electrical Products

    Addition Warnings The apparatus shall not be exposed to dripping or splashing and no objects lled with liquid, such as vases, shall be places on the apparatus. Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main power completely, the power plug should be disconnected from the main socket outlet completely.

Table of Contents