Bluetooth Operation - MAJORITY DX20 Manual

Using the MP3 Connection (AUX-In)
1. Plug the other end of the AUX cable into audio output/headphone jack on your MP3 player or other audio
device.
2. Press the POWER/MODE button to change the mode into Line-in. The mode LED light indicator will turn
Purple.
3. Once all set-up, you can play audio from your MP3 player or other audio device.
(https://www.majority.co.uk/wp-content/uploads/2022/08/DX20-MP3-Connection.png)

Bluetooth Operation

Pairing a Bluetooth Device for the First Time
• Select and press 32:(502'( button on the Subwoofer until Bluetooth mode is selected, indicated by a
�ashing blue light. Using the native controls on your Bluetooth device, select the "Majority DX20" when
prompted to choose a Bluetooth device. When successfully paired and connected, a beep will issue from
the unit and the Pairing Indicator will display a solid blue light. After initial pairing, the unit will stay paired
unless unpaired manually by the user, or until the
device is reset.
• To unpair, hold down the PAIR button for 3 seconds. You can now pair the device with another Bluetooth
device.
• The power cable into the mains socket. In case your device will disconnect from DX20, or if you are unable
to connect please start over again following the paring steps again.