Bluetooth Operation - MAJORITY Skiddaw II Instruction Manual

Instructions Guide

Bluetooth Operation

Pairing a Bluetooth Device for the First Time
Press the POWER/SOURCE button on the unit (Ref.4) or the
POWER button on the remote control (Ref.11) to switch on the
unit.
Select and press the INPUT directly on the remote control
(Ref.21) or press the POWER/SOURCE button repeatedly on
the soundbar (Ref.4) to enter Bluetooth mode, indicated by a
flashing blue light.
Using the native controls on your Bluetooth device, select the
"Majority Skiddaw II" in your Bluetooth settings to pair.
If your device requests a password, enter the default "0000".
Refer to the "user manual" for your specific device for instructions
on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from
the unit and the Pairing Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired
manually by the user, or until it is erased due to a reset of the
device.
If the soundbar is Bluetooth connected to a device, you can
press the PAIR button for 3 seconds to exit this device in order to
pair the device with another Bluetooth device.
If your device should become unpaired or you find it is unable to
connect, repeat the above steps.
13