Table of Contents
Advertisement
Auxiliary Operation
This unit features an auxiliary audio signal input jack for connecting external audio devices like MP3 players,
Digital Audio Device and listen to them through the speakers of this unit.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
2. Plug one end into the AUDIO IN JACK on main unit and the other end of the cable into the Line-out Jack or
Headphone Jack of your external audio device.
3. Turn on the unit and external audio
4. Tap the MODE Button to select AUX mode, "AUDIO IN" icon turns on, display shows the current time.
5. The volume level can now be controlled through the main Operate all other functions on the auxiliary
device as usual.
EQ Presets
This unit provides 4 different EQ modes to enhance your listening experience. You can select the desired
effect by pressing the EQ Button on remote control repeatedly at following sequence
CLASSIC¢ ROCK¢ POPS ¢ JAZZ¢ FLAT
Mute
Press the MUTE Button on remote control to mute the sound output from the speaker temporarily.
Press the MUTE Button again or VOLUME+/- Button to resume to normal speaker playback.
X-Bass Button
Press the X-BASS button on remote control if you want to enhance the bass when listening to the system, "X-
BASS" icon will appear in display. Press the button again to turn off extra bass effect; "X-BASS" icon will
disappear in display.
Sleep Operations
1. To activate the sleep timer, turn the unit on and tap the MODE button to select FM radio, CD, Bluetooth or
listening to music via AUDIO IN
2. Tap the SLEEP button on remote control, the sleep time icon appears on the display.
3. Repeatedly tap the SLEEP button to select a sleep time. The unit will turn off after 10, 20, 30, 40, 50, 60, 70,
80 or 90 minutes. Wait for 5 seconds after your selection for the unit to con rm the selection, the unit will
play for the selected length of time then automatically turn off.
4. To cancel the sleep timer, tap the SLEEP button repeatedly until timer shows "00", the sleep time icon
disappears on the display.
5. To turn the unit off before the selected length of time, press the STANDBY
. C) button at any time
2.) If you are falling asleep to music from an external device connected to the AUX input, the sleep timer will
shut off the power to this system but it will not turn off the external device.
Snooze Operations
SNOOZE FUNCTION
1. Should you wish to delay the alarm for 9 minutes you can activate the SNOOZE function.
2. When the alarm sounds, press the SNOOZE button to delay the alarm for 9 minutes.
3. After alarm off, the SNOOZE function will no longer
Advertisement
Table of Contents
