Instructions Guide
Bluetooth Operation
Pairing a Bluetooth Device for the First Time
Press the Power button on the unit (Ref.26) or the POWER
button on the remote control (Ref.10) to switch on the unit.
Select and press the BT button directly on the remote control
(Ref.11) ) or press the Mode/Source button (Ref.27) repeatedly
on the soundbar to enter Bluetooth mode, indicated by a
flashing blue light.
Using the native controls on your Bluetooth device, select the
"Majority Ben Macdui" in your Bluetooth settings to pair.
If your device requests a password, enter the default "0000".
Refer to the user manual for your specific device for instructions
on pairing and connecting Bluetooth devices.
When successfully paired and connected, a beep will issue from
the unit and the pairing indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired
manually by the user, or until it is erased due to a reset of the
device.
If your device should become unpaired or you find it is unable to
connect, repeat the above steps.
13