Table of Contents
Advertisement
Bluetooth Mode – Pairing with a device
The Majority D80 can be paired with a device via Bluetooth such as a phone, a tablet,
or any other Bluetooth-enabled device.
To pair the Majority D80 with your device via Bluetooth, change the mode to
•
Bluetooth by pressing the 'BT' button on the remote control (Rem.12).
Alternatively, use the 'Input button on the back of the main speaker (Ref.3). The
speaker's sensor LED light will flash dark blue, indicating that the speakers are
ready to be paired.
Switch Bluetooth on your device, and search for the Majority D80. On your
•
devices list you will see 'Majority D80'. Select and connect.
When successfully connected, you will hear an audible sound from the Majority
•
D80 confirming that the devices are now paired. The sensor LED light indicator
will stop flashing and now show a steady dark blue light. You can now play audio
from your paired device via the Majority D80.
To disconnect the Majority D80 while in Bluetooth mode from your device, simply
•
remove the speakers from your list of devices. Once disconnected you will then
hear an audible sound, indicating that the devices have been disconnected. The
sensor LED light will then start flashing dark blue.
While playing audio from your device, you can use the buttons on the remote
•
control including the Next/Forward' (Rem.10) or 'Previous' (Rem.3) buttons on
remote control to skip audio tracks.
Note: The Majority D80 Speakers are not compatible with Bluetooth earbuds.
Instructions Guide
EN
11
Advertisement
Table of Contents
