Bluetooth, Usb & Sd Controls - MAJORITY P300 User Manual

Bluetooth, USB & SD Controls
EN
Bluetooth
To choose Bluetooth Mode, press the MODE button on the remote or top panel
until Bluetooth Mode is selected.
Go to the Bluetooth settings on your chosen device and ensure Bluetooth is
switched on. Locate "Majority P300" in your available devices and select the
device to connect. Once connected, the voice prompt will confirm 'Bluetooth
Connected'.
To choose the music you wish to play, you will need to choose the song, album
or playlist from your device.
Note: The speaker only receives Bluetooth input from certain devices such as a
phones or tablets.
USB
To choose USB Mode, press the MODE button on the remote or top panel until
USB Mode is selected.
Insert a USB stick/drive into the USB port and use the remote control functions
to play, pause and navigate through files.
Note: The USB port cannot be used as a connection port with other devices.
This port is only to be used for playback from a USB stick or recording.
SD Card
To choose SD Card Mode, press the MODE button on the remote or top panel
until SD Card Mode is selected.
Insert an SD Card into the SD port and use the remote control functions to play,
pause and navigate through files.
8