Alarm Operation; Radio Operation - MAJORITY 1000002841 Instructions Manual

Alarm Operation

SETTING THE ALARM CLOCK
This feature allows the system to turn on automatically and wake you using a beeping alarm, the CD or the
RADIO.
1. In standby mode, press and hold the ALARM Button in on remote
control, Hour digits of alarm clock start ashing. You can also tap the ALARM Button in to direct enter alarm
time setting mode without waiting.
2. Press the 1• / 1 Button to set the hour and then press the ALARM Button in again to con rm, Minute digits
will be ashing.
 The PM INDICATOR "P" will light locate to the right of the Hour digits when the Hour digits
selected are for PM time. The AM INDICATOR "A" will light when the Hour digits selected are for
AM time.
3. Press the 1• / 1 Button to set the minute and then press the ALARM Button in again to con rm, alarm wake
up source will appear in display.
4. Press the 1• / 1 Button to select wake to Beep (buzz) ,CD or and FM(RAD) then press the ALARM Button
again to nish alarm setup.
1. If "Wake to CD" is selected but a CD is not inserted, the alarm will default to the Beeping Alarm
automatically when the alarm wake time is reached.
For 'Wake to Radio", the system will default to the last radio station listened to before switching off.
ACTIVE/DE-ACTIVE ALARM FUNCTION
1. To active ALARM, tap the "ALARM" Button inonce, the alarm icon" 0" will shown on LED display.
2. To cancel ALARM function by tap again the "ALARM" Button inuntil the alarm icon "0 " goes off.
Wake to Radio, CD or Beeping Alarm
When the alarm time is reached, the CD, radio or beeping alarm will sound for the time you set then shut
off and reset itself for the following day.
To stop the alarm immediately after it sounds, press the (9 Button on main
or remote control once. It resets itself for the following day.
To cancel the following day alarm, tap the ALARM Button once, ALARM icon"0 " goes off

RADIO OPERATION

1. In Off (standby) mode, press the POWER/ STANDBY BUTTON (9 on top of the main unit or on the remote
control to turn the unit ON.
2. Tap the MODE Button to select FM Radio The FM channel frequency shown on the LED Display to con rm
what mode you are in.
3. To manually tune to a speci c radio station, tap the 0 or •Button
on either main unit or TUNE+ or TUNE- Button on remote control repeatedly. Use the manual tuning method to
tune in weaker stations that are bypassed during Automatic Tuning.
4. To automatically tune to the next available radio station, press and hold the ior 0.1 Button on main unit or
TUNE+ or TUNE- Button on remote control for 1-2 seconds until frequency readout on the display begins to