Bluetooth Mode - MAJORITY DX30 User Manual

Bluetooth Mode

The Majority DX30 can be paired via Bluetooth with a phone, a tablet, or any other
similar device that you would like to play audio from via the speakers.
Short press the 'Power/Mode' button (Ref.3) twice to change the mode from AUX
•
to Bluetooth Mode. You will then hear an audio saying 'Bluetooth Mode'. The LED
light indicator will flash blue, indicating that the speakers are now ready to be
paired with your device.
Make sure your device has Bluetooth switched on. Search for 'Majority DX30' on
•
your device and connect. The Majority DX30 will beep to indicate that your
device is now paired with the Majority DX30. The LED indicator will show a blue
light. You can now start playing audio from your device.
Once paired, the DX30 will stay paired unless manually unpaired by the user, or
•
until the device is reset.
To unpair/disconnect your device, remove 'Majority DX30' from your device list
•
that you paired with.
While in Bluetooth Mode, when playing audio tracks, short press the
•
'Power/Mode' button (Ref.3) three times to skip and play the next audio track.
While in Bluetooth Mode, the volume level is also influenced by the one set on
•
your device. Please ensure that these are set as per your preferences.
Please note that Majority DX30 are not compatible with Bluetooth earbuds.
Short press the 'Power/Mode' button (Ref.3) twice to switch modes between
•
AUX to Bluetooth Mode or from Bluetooth mode back to AUX mode.
Instructions Guide
EN
7