Fujitsu ETERNUS DSP Series Cli Reference Manual page 13

2. CLI Commands
ethtool
■
SYNOPSIS
ethtool [options] <DEVNAME>
■ DESCRIPTION
Display standard information about a device.
■
OPTIONS
DEVNAME Device name.
-s|--change Set or change generic options.
• [ speed %d ]
• [ duplex half|full ]
• [ port tp|aui|bnc|mii|fibre ]
• [ mdix auto|on|off ]
• [ autoneg on|off ]
• [ advertise %x ]
• [ phyad %d ]
• [ xcvr internal|external ]
• [ wol p|u|m|b|a|g|s|d... ]
• [ sopass %x:%x:%x:%x:%x:%x ]
• [ msglvl %d | msglvl type on|off ... ]
-a|--show-pause Show pause options.
-A|--show-pause Set pause options.
• [ autoneg on|off ]
• [ rx on|off ]
• [ tx on|off ]
-c|--show-coalesce Show coalesce options.
ethtool -C|--coalesce Set coalesce options.
• [adaptive-rx on|off]
• [adaptive-tx on|off]
• [rx-usecs N]
• [rx-frames N]
• [rx-usecs-irq N]
• [rx-frames-irq N]
• [tx-usecs N]
• [tx-frames N]
• [tx-usecs-irq N]
• [tx-frames-irq N]
• [stats-block-usecs N]
• [pkt-rate-low N]
• [rx-usecs-low N]
• [rx-frames-low N]
• [tx-usecs-low N]
• [tx-frames-low N]
• [pkt-rate-high N]
13 ETERNUS DSP CLI Reference Guide