AAXA Technologies LED PICO + User Manual page 42

Technical Details
Troubleshooting
THE PROJECTOR DOES NOT TURN ON
Possible Causes
Low battery
There is no power.
The power button was not held long enough.
Solution
Charge the projector until the battery is fully
charged (LED indicator on botton of unit show a
green light). Projector must be turned off while
charging.
Check to ensure the power outlet source is good.
Check the Power Adapter/ USB Cable to
ensure a proper connection with the wall outlet or
computer as well as the projector. Ensure the
projector is off while charging.
To power on the projector, the power button
needs to be depressed for a full 3 seconds. try
holding the power button until the optical engine
turns on
39