Table of Contents
Advertisement
K. Blower Control Box with Snap Disc
1. The blower will turn on/off automatically when set to
AUTO (Figure 2.5).
2. When set to MANUAL, the fan will turn on/off only. This
setting over-rides the internal snap disc.
3. Adjust the speed of the fan by turning the HIGH/LOW
knob to the desired setting.
Figure 2.5
L. Blower Operating
1. Initial (cold) startup:
Push the Start-up Air Control back until it stops. The
blower tends to cool the appliance. Leave the blower off
until the burn is well established, i.e., 30 minutes.
NOTE: For maximum efficiency and lowest emissions,
when operating the blower in either the automatic or
manual setting for the blower off until the burn is well
established, i.e., 30 minutes.
2. The blower is equipped with Variable Speed Control
switch. Increase blower speed by turning the setting
knob counter-clockwise.
M. Opacity (Smoke)
This is the measure of how cleanly your appliance is burning.
Opacity is measured in percent; 100% opacity is when an
object is totally obscured by the smoke column from a
chimney, and 0% opacity means that no smoke column can
be seen. As you become familiar with your appliance, you
should periodically check the opacity. This will allow you to
know how to burn as nearly smoke-free as possible (goal of
0% opacity).
14
MANUAL: Overrides
MANUAL: Overrides
the internal snap disc
the internal snap disc
AUTO: Fan will turn
AUTO: Fan will turn
MANUAL
ON/OFF automatically
ON/OFF automatically
and is controlled by the
and is controlled by the
AUTO
internal snap disc
internal snap disc
Quadrafire • Expedition II AU Owner's Manual_Rev B • 2020 - ___ • 03/21
!
When burning your first fire, you will experience
smoke and odor from the appliance resulting from the
curing of paint and burning off of any oils remaining
from manufacturing.
OPEN WINDOWS DURING INITIAL BURN TO
DISSIPATE SMOKE AND ODORS!
• Odors may be irritating to sensitive individuals.
• Smoke detectors may activate.
N. Clear Space
NOTE: Do NOT place combustible objects within 4 ft
(1.2m) of the front of appliance (Figure 2.6).
• Mantel:
Avoid placing candles and other heat-sensitive objects
on mantel or hearth. Heat may damage these objects.
!
Do NOT place combustible objects in front of the
appliance. High temperatures may ignite clothing,
furniture or draperies.
Maintain 4 ft (1.22m) clearance to
combustible in front of appliance
Figure 2.6
CAUTION
WARNING
7095-819
Advertisement
Table of Contents
