Page 2
Statement The copyright of this manual belongs to Shenzhen JIEHE Technology Development Co., Ltd. (Giada, JIEHE’s global brand) and all rights are reserved. The company reserves the right to change this manual at any time without notification. Specifications here are for reference only, please take the real product as standard.
5.1 Preparation ....................8 5.2Upgrade the firmware.................. 8 5.2.1. Install the driver in your host PC by following steps ...... 8 5.2.2. Connect the DN76 with host PC ............8 5.2.3. Start the firmware updating .............. 9 6. JAHC APP ...................... 11 5.1 JAHC APP function ...................
A55 processor. With Mali-G52 GPU, DN76 can support a 4K video and a 1080P video playback simultaneously. DN76 can support up to two can support a 4K video and a 1080P video playback simultaneously. DN76 can support up to two can support a 4K video and a 1080P video playback simultaneously.
3. Accessories Installation Steps For safety reasons, please ensure that the power cord is disconnected before opening the case. How to open bottom cover Unscrew the four screws and remove the bottom cover. (mini PCIE slot for 3G/4G and SIM card slot are on this side) 3.1 3G/4G Installation Default SMA connector and cable is for WIFI.
3.2 SIM Card Installation This product supports standard SIM card with the size of 25mm×15mm. 1. [Open] the SIM card holder and pull it up. 2. Insert the SIM card. 3. [Lock] the card holder. - 6 -...
4. How to play different videos on two screens The two HDMI port on DN76 support clone mode, but you can play different videos on two screens by following setup: a. Connect DN76 with two HDMI screens, you can see they are clone mode.
After you get the Archive from Giada technical support, copy the Archive to your host PC, you will find After you get the Archive from Giada technical support, copy the Archive to your host PC, you will find After you get the Archive from Giada technical support, copy the Archive to your host PC, you will find below files inside: ...
Run RKAndroid tool V2.93 under the windows of the host PC. c. Connect the DN76 player to the host PC via usb OTG port (please refer to Fig 1for location of the OTG Connect the DN76 player to the host PC via usb OTG port (please refer to Fig 1for location of the OTG Connect the DN76 player to the host PC via usb OTG port (please refer to Fig 1for location of the OTG port).
Firstly, hold the DN76 player recovery button (please refer to Fig1 for t Firstly, hold the DN76 player recovery button (please refer to Fig1 for the location of the button), then he location of the button), then connect the power adaptor to the player, you will see connect the power adaptor to the player, you will see “Found a MSC Device”...
The user can set up automatic startup and shutdown, one week as a circle. 6.2 Startup(open) & shutdown(close) time setup .2 Startup(open) & shutdown(close) time setup System Requirements: Giada player with JAHC APP function Giada player with JAHC APP function. (please refer to Fig1). Android OS includes JAHC APP(...
Page 13
Fig1 a. After enter the android desktop, click the JAHC APP icon and the JAHC interface will pop up (please refer to After enter the android desktop, click the JAHC APP icon and the JAHC interface will pop up (please refer to After enter the android desktop, click the JAHC APP icon and the JAHC interface will pop up (please refer to Fig2) Fig2...
Page 14
Fig3 Fig4 Fig5 Caution: If the interval from shutdown time to next resume time is less than 3 minutes, the system will not shut down. - 13 -...
.1 Use command ADB version to check if Windows ADB tool is installed. 7.2 Install Rock chip driver. a. Connect DN76 with OTG cable to windows PC host. a. Connect DN76 with OTG cable to windows PC host. b. Select ‘Connect to PC’ under android OS under android OS->Settings->USB->connect to PC.
Need help?
Do you have a question about the DN76 and is the answer not in the manual?
Questions and answers