Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with Dolphin mobile computers for maximum performance and durability. Contact a Honeywell sales representative for...
Mobile Computer Features All Imagers Imager (LED / Laser Aperture) Ambient Light Sensor Touch Panel Notification/Scan/ Battery Status LEDs Scan Buttons Power Button Keyboard (model dependent) Microphone Keypad Status LEDs...
CK65 Model with N6703 Imager Laser Safety Camera Lens Label Location and Flash Hand Strap Scan/Aux Button Scan/Aux Button All CK65 Units Battery Latch (under hand strap) I/O Connector MicroSD Card Door (battery and hand strap removed)
CK65 Model with EX20 Imager Laser Safety Camera Lens Label Location and Flash Hand Strap Scan/Aux Button Scan/Aux Button All CK65 Units Battery Latch (under hand strap) I/O Connector MicroSD Card Door (battery and hand strap removed)
Install a microSD Card (Optional) Always power off the computer before attempting to install or remove a card. Install the Battery for hand strap release information. Format the microSD card before initial use.
Install the Battery The CK65 mobile computer ships with a Li-ion 3.6 VDC, 18 watt-hour battery manufactured for Honeywell International Inc. Use only Honeywell Li-ion battery pack models AB17, AB18, and 1001AB01. Ensure all components are dry prior to placing the battery in the computer.
4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration bar code or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled).
Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. Press and release the Power button to wake the computer. Drag the toward the top of the display to unlock the computer.
Navigation and Function Buttons For button locations, see Mobile Computer Features. Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Press the right, left or front scan button to trigger the scanner.
About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a bar code to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Bar Code with the Scan Demo Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle.
Sync Data To move files between your CK65 and a computer: Connect the CK65 to your computer using a USB charge/ communication accessory. On the CK65, swipe down from the top of the screen to see the notifications panel. Touch the Android System USB Connection notification twice, to open the options menu.
Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. Press and hold the Power button until the options menu appears.
Google, Android, Google Play and other marks are trademarks of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.