Symbology Settings; Decode Settings - Honeywell CK65 Series User Manual

Setting
Launch Browser
Scan to Intent
Launch EZ Config
Data Intent

Symbology Settings

Use the Symbology Settings to enable or disable barcode symbologies for the
selected scan setting profile.
•
•
To view a list of default settings for supported symbologies, see

Decode Settings

Adjust the Decode Settings when scanning barcodes that are densely packed or
poor quality.
50
Description
Enable or disable URL barcode handling.
If a barcode starts with http:// or https://, the browser
opens using the barcode data as a URL.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH-BROWSER
Enable or disable special handling of scan-to-intent
barcodes.
Applies to barcodes in one of the following formats:
Where: ACTION and extra-data are any string of
characters.
Launches an application listening for the intent.
Intent action:
"com.honeywell.scantointent.intent.action." + ACTION
Intent extra:
"com.honeywell.scantointent.intent.extra.DATA" contains
the remainder of the barcode data after the first '$'
character.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Enable or disable special handling of EZConfig barcodes.
Applies to EZConfig barcodes that are encoded with the
Aztec symbology and contain specific header data.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_CONFIG
Enables the reception and processing of barcode data
without using an SDK or library.
Tap the check box next to a symbology name to enable (check mark) or disable
(no check mark) decoding for that symbology.
Tap the symbology name to view and modify additional configuration
parameters for the symbology selected.
'//' ACTION
'//' ACTION '$' extra-data
page
CK65 Mobile Computer User Guide
Default
Enable
Enabled
Enabled
Disabled
100.