Enable or Disable Provisioning Mode
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the button to toggle the provisioning On or Off.
About Wi-Fi Staging
You can use the Honeywell Wi-Fi Staging app to quickly set up new devices by
configuring one device and using it to stage others. Wi-Fi Staging can also be used
to enroll devices in a Mobile Device Management (MDM) system by connecting
units to a specified network and downloading and installing the specified MDM
client app.
Once you have set up a configuration in the Wi-Fi Staging app on the server device,
Wi-Fi staging will use that device as a hotspot and wait for a client to connect to it.
The configuration will be distributed to the client device once communication is
established between the client and the server device.
Staging Devices
Wi-Fi Staging requires two steps:
1. Setting up a master device to act as a server (see next section).
2. Setting up the client device (see
Set Up a Device as a Server
Wi-Fi Staging provides two kinds of configurations for a master device acting as a
server through a hotspot. Setup of the server device will differ based on the staging
configuration you choose:
•
•
84
> Honeywell Settings > Provisioning mode.
Basic Configs include the most common system settings:
•
System language
•
Bluetooth and NFC
•
System volume
•
Location
•
Network
•
File download
•
Application installation or launch
Advanced Configs allow you to stage your devices with .xml files
Set Up Client Devices
CK65 Mobile Computer User Guide
on page 87).