Network Setup > Dynamic Dns - Multitech RouteFinder RF825-C-Nx User Manual

Network Setup > Dynamic DNS
The DDNS Client is used to update the IP address of the modem/router in a DDNS server for the configured
domain name whenever the IP Address changes, thus, leaving the domain name to be pointing to the current IP
Address of the modem/router all the time.
WAN
Dynamic DNS Client
Check the box to enable DDNS Client. Default = Disable.
Dynamic DNS Server
Enter the name of the IP Server to which obtained IP addresses will be registered.
Dynamic DNS Port
Enter the port number through which the DDNS has to update the server. By default, port 80 is used. This
port is configurable.
User Name
Enter the name of the user who will be allowed access the DDNS Server.
Password
Enter the Password the user will use to access the DDNS Server.
Domain Name
Enter the domain name registered with the DDNS server. The external world reaches the RouteFinder
when the Domain Name is configured.
Update Interval
Enter the interval in days after which the IP Address will be updated by the DDNS server. Default: 28 days.
Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B)
Chapter 5 – Using the RouteFinder's Web Management Software
Network Setup > Dynamic DNS
58