Save & Restart Button Under Menu Bar - Multitech RouteFinder RF825-C-Nx User Manual

Multi-tech routefinder rf825-c-nx security appliance: user guide

Hide thumbs Also See for RouteFinder RF825-C-Nx:

Table of Contents

Chapter 4 – Configuring the RouteFinder

Save & Restart Button Under Menu Bar

Select the Save and Restart button located just under the menu bar. The Save and Restart screen displays.

Save to Flash Memory

If a connection is established, then the settings have been entered correctly and your basic configuration is now

complete. Now, you must save your settings to the Flash Memory; this saves the current settings in the flash

prom and prevents settings from getting lost at the next power up.

Restart

This is optional. You do not have to restart the RouteFinder after saving to the flash memory.

Your Basic Configuration Using the Setup Wizard is now Complete.

Testing Your Workstation

Test your workstation by trying to access the Internet. If a connection is established, then the settings have been

entered correctly.

Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B)

Table of Contents

Troubleshooting