Example 1 - Set Up A Routefinder With A Tunnel To A Client Behind A Nat Device; Step 1 - Network Setup - Multitech RouteFinder RF825-C-Nx Reference Manual

Example 1 – Set Up a RouteFinder with a
Tunnel to a Client Behind a NAT Device
Note: Prerequisite Steps must be completed before you start this setup.
Step 1 – Network Setup
1. Log into your RouteFinder and go to the Networks & Services screen.
2. Create and enter in the Name, IP Address, and Subnet Mask of the Remote WAN.
3. Click the Add button to add the new network to the list
4. Create and enter in the Name, IP Address, and Subnet Mask of the Remote VPN Client.
5. Click the Add to add the new network to the list
Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B)
Chapter 2 – Behind NAT Setup Examples
21