Table of Contents
Advertisement
8. Using the System
The Energizer Homepower HP-6 Series system can be monitored using a variety of interfaces including Edge
Lighting, an LCD panel, and the Energizer Homepower App. The Edge Lighting is designed to convey at-a-glance
information about system operating states such as Normal, Stand-by and Fault.
Operating
State
Normal
Fault
Low SoC
(State of
Charge)
Table 5. Energizer Homepower HP-6 Series – Edge Lighting
To activate the LCD panel, swipe from left to right on the Energizer Logo. The LCD panel displays real-time
information of solar generation, energy consumption from house and Backup (UPS) loads, Feed-in (Export) and
battery State-of-Charge (SoC).
Fig. 41. Activate LCD Panel
V23-00220
6
Energizer Homepower HP-
Series - Installation Manual
Sequence
Description
The Edge Lighting mimics a
Breathing
breathing function when the
system is charging, discharging
or in stand-by. The brightness
varies between 20-80%.
Flashing
Fault is indicated by a sequence
of 3 flashes (duration 0.5s).
repeating every 8s.
10% > SoC > 5%
Stand-by - When the system is
in Stand-by mode and SoC is
between 5% and 10%, there is a
flash (duration 0.2s) every 2 mins.
When the system is in Stand-by
SoC < 5%
mode and SoC is lower than 5%,
OFF
the edge lighting remains off to
conserve energy.
Fig. 42. System Status Panel
38
© Energizer 2022
6
Energizer Homepower HP-
Series - Installation Manual
9. Maintenance & Support
The Energizer Homepower HP-6 Series uses the Energizer Homepower Installer App for detection, troubleshooting
and resolution of faults. During the commissioning, the Installer App is designed to run diagnostics aimed at
verifying system parameters, identifying installation errors, and providing appropriate resolutions. In case an error/
fault is detected, the App shall provide a relevant fault code and a brief description of the fault. It must be used to
identify, diagnose, and troubleshoot the error/fault.
Maintenance
The Energizer Homepower HP-6 Series does not require any routine maintenance. For accumulation of dirt, dust,
or debris, please ensure the product frame is cleaned using a soft dry cloth. The Energizer HP-6M has vents
located on the top, left and right-hand side of the unit for natural convection, and these must be kept free of objects
and/or obstructions.
WARNING! Do not use solvents and/or cleaning fluids to clean the Energizer Homepower HP-6
Series units or expose them to harsh chemicals or vapours.
WARNING! Do not use any third-party accessories, fluids, or paint to alter the internal or external
components including the exterior casing.
Troubleshooting (For Installers)
If the system is not functioning correctly, use the Energizer Homepower Installer App to run diagnostics on the
system and carry out suggested resolutions. You may also check the system errors that appear on the LCD panel
located under the Magna-Flap.
NOTE: The LCD panel located under the Magna-Flap can be activated to perform advanced
troubleshooting using the Energizer Homepower Installer App. This feature will have to be
enabled by contacting Energizer Homepower.
Emergency Procedures
The Energizer Homepower HP-6 Series has a lithium ion battery that contains several chemicals and organic
electrolytes, which are hermetically sealed within a metal enclosure. There is no risk of chemical exposure under
routine use of the unit's specific application. In case of an emergency, where there is a genuine threat to health or
safety, contact emergency personnel or fire response teams immediately and present the Safety Datasheet (SDS).
DANGER! Do not perform the suggested actions listed below unless it is safe to do so.
In case of a fire:
•
Inform all affected people e.g., family, neighbours etc of the issue and evacuate the area.
•
Turn off the AC breakers connected to the HP-6M unit within the switchboard.
•
Use dry chemical (ABC), carbon dioxide or alcohol resistant foam extinguishers.
•
Do not use water jets or streams, as it may scatter or spread chemicals.
V23-00220
39
© Energizer 2022
Advertisement
Table of Contents
