Step 3: Install The Modem In Windows; Adding The Modem To Windows - Multitech MT2834ZDX Quick Reference Manual

Quick Reference Guide

Step 3: Install the Modem in Windows

If you use Windows 95, Windows 98, or Windows NT 4.0, you must
install the modem in the operating system. (If you use Windows 3.1 or
another operating system, skip to Step 4.)

Adding the Modem to Windows

1. Make sure your modem is connected properly, then turn on your
computer. Windows should detect your new modem and open the
Install New Modem wizard.
Note: If Windows cannot detect your modem, the modem may be
turned off, it may be unplugged, it may be plugged into the wrong
connector on your computer, or the serial cable may be faulty. See
"None of the LEDs Light When the Modem Is Turned On" and "The
Modem Does Not Respond to Commands" in Chapter 7 of the User
Guide , "Solving Problems."
2. If Windows identifies your modem correctly as a MultiTech Multi-
Modem or a MultiModem MT2834ZDX, click Next to install the mo-
dem. After the modem is installed, click Finish to exit.
3. If Windows cannot identify your modem (for instance, if it identifies
your modem as a "Standard Modem"), click Change. A dialog box
with a list of manufacturers and a list of modems appears.
4. Select Multitech Systems from the Manufacturers list.
5. Select MultiModem MT2834ZDX from the Models list.
6. Click Next. Windows installs and configures the modem.
7. Click Finish to exit.
12