Step 5: Call The Multi-Tech Bbs; Windows Hyperterminal - Multitech MT2834ZDX Quick Reference Manual

Quick Reference Guide
9. If the software allows you to edit the no-connect messages ( NO
CARRIER, BUSY, NO ANSWER, NO DIALTONE ), make sure there
is no space between DIAL and TONE in NO DIALTONE .
10. Refer to the software manual or online Help for other configuration
choices; in most cases you can accept the default values.

Step 5: Call the Multi-Tech BBS

Test the modem's data functions by calling the Multi-Tech Bulletin Board
System (BBS) and downloading ZDXHELP.HLP, which contains the full
MultiModemZDX Owner's Manual in convenient Windows Help format.

Windows HyperTerminal

1. Click Start; then choose Programs, Accessories, and HyperTer-
minal.
2. Start HyperTerminal by double-clicking on the Hypertrm icon. Hy-
perTerminal asks for the name of the connection.
3. Type Multi-Tech BBS in the Name box and click OK.
4. In North America, type 800 in the Area code box and 392-2432 in
the Phone number box. Local and international users, type 612 in
the Area code box and 785-3702 in the Phone number box.
5. Verify that your modem is selected in the Connect using box, then
click OK.
6. In the Connect dialog box, click Dialing Properties.
7. Make any necessary changes in the Where I am and the How I dial
from this location boxes. If you must dial 9 to access an outside
line, you should type 9 in both the local and the long distance boxes
unless your phone system has a special requirement.
16