Multitech MT2834ZDX Quick Reference Manual page 56

Quick Reference Guide
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
48
R n
Reverse Originate/Answer Modes
n = 0 or 1
0
R0 Modem will not reverse modes.
R1 Modem will reverse modes when R is added to
the dial string.
&R n Clear to Send Control
n = 0, 1, or 2
1
&R0 Let CTS state follow RTS state when on line.
&R1 Force CTS high (on).
&R2 Let CTS drop on disconnect for time set by S24,
then go high again.
&RA n Asymmetrical Bit Rate
n = 0 or 1
0
&RA0 Enable asymmetrical bit rate in V.34 mode.
&RA1 Disable asymmetrical bit rate in V.34 mode.
&RD n Square Wave Ring Detect
n = 0 or 1
1 (ZDX)
0 (ZDXI, ZDXK)
&RD0 Modem detects only sine wave rings.
&RD1 Modem detects both sine and square wave rings.
&RF n CTS/RTS Interaction Control
n = 0 or 1
1
&RF0 Let CTS follow RTS.
&RF1 Let CTS act independently (use with &R).