Installing The Modem Driver; Installing Your Data Communications Software - Multitech MT5656ZDX User Manual

Installing the Modem Driver

If you use Windows 2000 or newer, you must install the modem driver. If you use another operating system, see
Appendix C.
When operating the modem under Windows, the modem driver can be installed by using the Plug and Play
feature. Follow the 4-step procedure below.
Make sure your modem is connected properly, and then turn on your computer. Windows should detect
1.
your new modem and open the Welcome to the Found New Hardware wizard.
Note: If Windows cannot find a modem, your modem may be turned off, it may be plugged into the wrong
connector on your computer. See "Troubleshooting" in the User Guide.
Insert the MT5656ZDX CD.
2.
Windows installs and configures the modem.
3.
Click Finish to exit.
4.

Installing Your Data Communications Software

Data communications software is designed to send and receive messages. Multi-Tech includes data
communications software with your modem. However, the modem will work with most data communications
software. To install the data communications software provided with this modem, insert the CD into the CD-
ROM drive and click on the PhoneTools icon. You will be asked to choose your language. The software will
automatically load onto your PC.
Multi-Tech Systems, Inc. MT5656ZDX User Guide
Chapter 2 – Hardware Installation
11