Sending A Fax - Multitech MT5656ZDX User Manual

Sending a Fax

With your data communications software, you can use your modem to send and receive faxes directly from your
computer. The following steps show you how to fax a document directly from a Windows application without
opening the data communications program.
1. Create a document in a Windows application, such as Word, a graphics editor, or a spreadsheet.
Keep the application and the document open, and select Print from the File menu.
2. Select CAPTURE FAX BVRP as the printer driver, and then click OK. The Send Fax wizard
appears.
3. In the Recipient section, type the required information or extract it from the Phone Book by
clicking this icon.
4. In the Template section, optionally select a cover page and type a cover message.
5. Select the document to be sent. The default file when sending from within a Windows application is
Capture.dgr.
6. Select the date and time to send the document, if you do not want to send it immediately.
7. Click Finish to start the transmission.
Multi-Tech Systems, Inc. MT5656ZDX User Guide
Chapter 3 – Operation
15