Alliance Laundry Systems HFNKCASG113TN01 Manual

Alliance Laundry Systems HFNKCASG113TN01 Manual

Frontload washer
Table of Contents

Advertisement

Quick Links

Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Frontload Washer
Refer to Page 9 for Model Identification
Insert
Wash
Rinse
Spin
Coins/Card
Hot
Warm
Cold
Blankets
Delicate
Delicate
Cold
Warm
Cold
Extra
Extra
Wash
Rinse
Door
START
FLW2433N_SVG
Part No. 806147ENR3
January 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HFNKCASG113TN01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alliance Laundry Systems HFNKCASG113TN01

  • Page 1 Frontload Washer Refer to Page 9 for Model Identification Insert Wash Rinse Spin Door Coins/Card Warm Cold START Blankets Delicate Delicate Cold Warm Cold Extra Extra Wash Rinse FLW2433N_SVG Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No.
  • Page 3 Read all instructions before using unit. Hazardous voltage inside. Disconnect power before serv- icing. This product uses FreeRTOS V7.2.0 (www.freertos.org). © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 4: Table Of Contents

    Changing Cycles...................14 © Copyright 2019, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 5 Coin 1 Value dEn 1..................39 Coin 2 Value dEn 2..................39 Start Pulse Value PLSE..................39 Start Pulse Mode PLSNod................40 Programmable Output Type AtyPE..............40 Default Cycle dFtCyC................... 41 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 6 How to Program Cycle Modifier Extra Rinse Additional Rinse Time CNP 7...62 How to Enter Cycle Programming CyCLE-............. 62 Programming the Fill Step Type..............64 Programming the Supply Step Type............65 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 7 Coin Drop 2 Input Test d 11................83 Vend Connection Header Present Test d 12..........83 Start Pulse Test d 13.................. 83 Door Switch Input Test d 15............... 84 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 8 Infra-red Communications................103 How to Begin Communications with an External Device......103 Card Reader Communications - Card Models Only........103 Network Communications................103 Default Cycle Time ................104 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 9: Model Identification

    HFNKXASP113CW01 HFNKCASP113TN32 HFNKYASG113CN01 HFNKCASP113TW01 HFNKYASG113CN31 HFNKDASG113CN01 HFNKYASG113CN32 HFNKDASG113CN31 HFNKYASG113CW01 HFNKDASG113CN32 HFNKYASP113CN01 HFNKDASG113CW01 HFNKYASP113CN31 HFNKDASP113CN01 HFNKYASP113CN32 HFNKDASP113CN31 HFNKYASP113CW01 HFNKDASP113CN32 HFNZCASP113TN01 HFNKDASP113CW01 HFNZCASG113TN01 HFNKXASG113CN01 HFNZCASP113TN31 HFNKXASG113CN31 HFNZCASG113TN31 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 10: Preliminary Information

    This control is an advanced, programmable computer that lets the software. Contact Alliance Laundry Systems for a list of ap- owner control most machine features by pressing a sequence of proved PDAs and other external devices.
  • Page 11: Control Identification

    1. LED Light 2. SELECT CYCLE pads 3. Six 7-Segment Digits 4. Display 5. LED Status Lights 6. START pad 7. SELECT Cycle Modifier pads Figure 1 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 12: Display Identification

    During diagnostic testing or manual programming of the control, these digits will display descriptive codes and values. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 13: Washer Operation

    Any coin entered after the first fill cle will begin. completes will be added to the total coin counter, but the user will not be able to change cycles. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 14: Closing Washer Door

    Start Mode will be exited and the control will enter Start Mode. Pause/Resume Mode (Enable/Disable) parameter is programmed to Enabled and if the control is in Run Mode or Door Locking Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 15: Auto Flush Mode

    OPL cycle and the cycle is not able to automatically resume. If the user presses any key, Start Mode is entered. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 16: Special Features

    Coin Vault and the Service Door. The informa- tion is saved in memory. An open service door and a closed coin • Machine Configuration #5 Display Test © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 17: Special Vend

    Refer to Error Codes for more details on errors, their displays, and their priorities. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 18: Opening The Service Door

    “white/black” and “red/blue” wires. This will allow the user to access various programming options, diagnostics, and audit capa- bilities. Refer to Figure 2 . © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 19 Opening the Service Door FLW31R_SVG FLW32R_SVG W521I_SVG FLW6R_SVG1 1. Service Door 2. Control Panel Figure 2 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 20: Entering The Manual Mode

    The features in the group cannot be are pressed for 4.25 minutes, the control will return entered. to the previous mode of operation. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 21 "rESEt" Manual Reset Manual Reset Mode. "diAg" Press the START keypad to Diagnostic enter Diagnostic Tests. Refer to Tests Diagnostic Tests flowchart. FLW103R_SVG Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 22: Programming Control

    1 - 65,535 PLSE Start Pulse Mode 0, 128, 192 PLSNod Programmable Output 0 - 13 AtyPE Type Default Cycle 1 - 6 dFtCyC Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 23 Day of Week Water Leak Detection 0 - 127 E Ld 2 Number of Cycles Water Leak Detection on/oFF E Ld 3 Display Sequence Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 24 Set Real Time Clock — 0 - 23 rtC 2 Hours Set Real Time Clock — 1 - 7 rtC 3 Day of Week Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 25 Month Special Vend 1 Length 0 - 24 SP1 7 in Hours Special Vend 1 End oFF, 1 - 31 SP1 8 Date Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 26 0 - 31 SP1 26 Modifier Key #2 Extra Rinse Options Special Vend 2 Enable on/oFF Cycle Modifier Pro- — — CNP- gramming Menu Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 27 Time Starting Serial No. 1506011827 = 7 Cycle Pause Resume on/oFF CyCPAU IR Access on/oFF irA En Manual Rapid Advance on/oFF rAPdEn Access Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 28 — oPL- OPL Mode Enable on/oFF oPL 1 OPL Delayed Start on/oFF oPL 2 OPL Display Power on/oFF oPL 3 Save Out of Order on/oFF © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 29 Extra Rinse Vend Price Adder "Ats dP" Vend Price Decimal Point "dEn 1" Coin #1 Value "dEn 2" Coin #2 Value continued FLW110R_SVG Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 30 "E nF-" "E nF 1" No Water Flow Error No Water Flow Error "E nF 2" No Water Flow Error Time continued FLW111R_SVG Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 31 Display Sequence "E Sd- " "E Sd 1" Slow Drain Slow Drain Detection Detection Error "E Sd 2" Slow Drain Detection Adjust continued FLW106R_SVG Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 32 "FL Hi" High Water Level "FLSH t" Flush Out Time for Fill Steps "norF t" No Refill After Time for Agitate Step continued FLW104R_SVG Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 33 Start Hour "dLS 6" End Month "dLS 7" End Day of Week "dLS 8" End Week of Month "dLS 9" End Hour continued FLW112R_SVG Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 34 "SP1 14" Special Vend 1 Price #4 "SP1 15" Special Vend 1 Price #5 "SP1 16" Special Vend 1 Price #6 continued FLW113R_SVG Figure 9 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 35 Hold Step Custom Message #1 Custom Messages "PCyCtd" "CMESS2" Cycle Time Custom Message #2 Display Enable "nCyCtd" No Cycle Time Display continued FLW114R_SVG Figure 10 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 36: Vend Price 1 Ats 1

    OPL Mode Enable (On/Off) "oPL 2" OPL Delayed Start (On/Off) "oPL 3" "oUt " OPL Display Power Save (On/Off) Out of Order FLW115R_SVG Figure 11 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 37: Vend Price 2 Ats 2

    Cold is selected. Warm. This vend price will be shown in the display when Deli- cate Warm is selected. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 38: Vend Price 6 Ats 6

    START (en- ter) keypad to enter the value of the digit and advance to the next digit. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 39: Vend Price Decimal Point Ats Dp

    3. Press the Cold (∧) or the Delicate Cold (∨) keypad to scroll tion without changing the value, press the Delicate through the programmable options until PLSE appears in the Warm (<) keypad. display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 40: Start Pulse Mode Plsnod

    Mode, Start Mode 6. Press the Cold (∧) or the Delicate Cold (∨) keypad to increase or decrease the current number until correct. Table 2  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 41: Default Cycle Dftcyc

    Delicate Warm on and will sound for a quarter of a second. This signal will sound each time a keypad is pressed. Table 3  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 42: How To Program The Audio Signal

    5. Locate the desired number in the first column of Table 4 on the following page. Serial or Net- work Vending Command Coin/Card In- Signal Value Start Mode Signal End of Cycle Key Pressed Table 4  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 43: Network Node Number Node

    Manual Mode. 4. When nodE appears in the display, press the START (enter) keypad. The current Network Node Number status will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 44: Error Code Programming Error

    Fill Error Time - Time allowed in mi- E FL 2 nutes to reach target fill level before set- ting a fill error. Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 45 E Ld 3 (On/Off) - Will show a moving dash "-" across the 7-segment display while the water leak detection is being performed. Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 46 Off, the Suds Removal Routines will use cy- cle time which may result in poorer ma- chine performance. Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 47: Low Water Level Fl Lo

    The new value is saved and the next op- AtS 1 will appear in the display. tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 48: Flush Out Time For Fill Step Flsh T

    This option allows the owner to set the controls internal clock to the correct time and date. 1. Control must be in Manual Mode. Refer to How to Enter the Manual Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 49: Set Daylight Savings Time Dls

    Press the START (enter) keypad, and through the programmable options. Refer to Table 7 . AtS 1 will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 50: How To Read The Days Enable Value Table

    * The default value programmed at the factory is 0. tion will appear in the display. SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 51 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 52 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 53 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 54 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 8  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 55: How To Program Special Vend 1 Start Minute Sp1 2

    3. Press the Cold (∧) or the Delicate Cold (∨) keypad to increase or decrease the start month to the desired month. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 56: How To Program Special Vend 1 Length In Hours Sp1 7

    3. Press the Cold (∧) or the Delicate Cold (∨) keypad to increase or decrease the value to the desired month. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 57: How To Program Special Vend 1 Vend Price 4 Sp1 14

    15 appears in the display. 2. When SP1 15 appears in the display, press the START (en- ter) keypad. The current value will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 58: How To Program Special Vend 1 Wash Status Agitate Steps Subtracted Minutes Sp1 21

    1. Press the Cold (∧) or the Delicate Cold (∨) keypad to scroll ter) keypad. The current value will appear in the display. through the programmable Special Vend 1 options until SP1 26 appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 59: Special Vend 2 Days Enable Sp2

    CNP 2 appears in the appears in the display. Press the START (enter) keypad, and display. AtS 1 will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 60 State set to State set to Configuration cles set to Rinse 1 set to Wash Nod 2 Nod 1 Value 3 *** Table 10  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 61: How To Program Cycle Modifier Extra Rinse Key #2 Options Cnp 3

    7. Press the Cold (∧) or the Delicate Cold (∨) keypad to change through the programmable options until CNP- appears in the the configuration value. display. Refer to Table 10 for the value definitions. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 62: How To Program Cycle Modifier Extra Wash Additional Wash Time Cnp 4

    5. Press the Cold (∧) or the Delicate Cold (∨) keypad to scroll then press the Hot key pad. through the programmable options until CNP 7 appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 63 Step 50 up a location. Step 50 is reset as an invalid step. Table 11 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 64: Programming The Fill Step Type

    3-255 Motor Off Time (seconds) PAUSE XXFi10 Rotation Speed SPEEd XXFi11 no rot, LoW Ag, rEg Reversing rEvErS XXFi12 rEv on, no rEv Table 12 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 65: Programming The Supply Step Type

    External Output #2 oUtP 2 XXSU20 oFF, on External Output #3 oUtP 3 XXSU21 oFF, on External Output #4 oUtP 4 XXSU22 oFF, on Table 13 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 66 Step 2 Agitate Step Step 3 Supply Step Acts as own step Step 4 Fill Step Step 5 Supply Step Active with Step 4 Table 15 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 67: Programming The Agitate Step Type

    External Output #2 oUtP 2 XXAg16 oFF, on External Output #3 oUtP 3 XXAg17 oFF, on External Output #4 oUtP 4 XXAg18 oFF, on Table 16 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 68: Programming The Soak Step Type

    External Output #2 oUtP 2 XXSo16 oFF, on External Output #3 oUtP 3 XXSo17 oFF, on External Output #4 oUtP 4 XXSo18 oFF, on Table 17 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 69: Programming The Drain Step Type

    External Output #2 oUtP 2 XXdr11 oFF, on External Output #3 oUtP 3 XXdr12 oFF, on External Output #4 oUtP 4 XXdr13 oFF, on Table 18 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 70: Programming The Extract Drain (Spin) Step Type

    For example, if spinning at a rate of 600 RPMs, the ma- chine will start ramping down when 25 seconds remain in the current step. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 71: Programming The Audio Step Type

    External Output #2 oUtP 2 XXAU07 oFF, on External Output #3 oUtP 3 XXAU08 oFF, on External Output #4 oUtP 4 XXAU09 oFF, on Table 20 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 72: Programming The Hold Step Type

    In both cases a Start key press will al- this functionality by setting the steps as Mod 1 or Mod 2. Refer to low the cycle to resume. Cycle Modifier Programming CNP-. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 73: Hold Step Custom Messages Cness

    1. Control must be in Manual Mode. Refer to How to Enter the for the normal allocated time. Further attempts beyond the pro- Manual Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 74: Cycle Pause Resume Cycpau

    IR device. 1. Control must be in Manual Mode. Refer to How to Enter the Manual Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 75: Factory Test Ft En

    Press the START (enter) keypad, and through the programmable options until oPL- appears in the AtS 1 will appear in the display. display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 76: Opl Mode Enable Opl 1

    Press the START (enter) keypad, and 4. When oPL- appears in the display, press the START (enter) AtS 1 will appear in the display. keypad to enter the OPL submenu. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 77 6. Press the START (enter) keypad when the correct value ap- pears in the display. The new value is saved and the next op- tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 78: Collecting Audit Information

    Total Number of Start Pulses PULSE Total Number of Rapid Ad- rAPCyC vance Cycles Total Number of Run Hours rUnHrS Resettable Coin #1 Count rCoin1 Table 23  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 79: Manual Reset

    6 Cycle 7 rCyC 7 Cycle 8 rCyC 8 Cycle 9 rCyC 9 All Cycles ALLCyC All Cycles and Global Pro- gramming Parameters Table 24 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 80: Testing Machine And Electronic Control Functions

    Coin Drop #2 Input Test d 11 C2 -- Vend Header Present Status Test CH oP (Open) or CH CL (Closed) d 12 Table 25  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 81 Machine Configuration #3 Display Test d 31 C --- Machine Configuration #4 Display Test d 32 d --- Machine Configuration #5 Display Test d 33 E --- Table 25 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 82: Diagnostic Test Descriptions

    Machine Configuration #4 Door Lock Switch Display Test Input Test "d 33" Machine Configuration #5 "d 17" Show Fill Display Test Time Test FLW107R_SVG Figure 12 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 83: Control Software Version Number Test D 1

    Testing Mode. Refer to How to Enter Testing Fea- the Testing Mode. Refer to How to Enter Testing Feature at the ture at the beginning of this section. beginning of this section. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 84: Door Switch Input Test D 15

    Ld and the START (enter) keypad LED will flash. Begin the test dr XXX. The XXX will be the average fill time in seconds. by pressing START (enter). If the door is open, CLoSE, door © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 85: Water Level Test D 26

    XXX. X which is the voltage in 0.1 Volt precision. To exit the DC Bus Voltage Test, press the Delicate Warm (<) keypad. The control will return to the Testing Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 86 Board "A" Vend Con- Configura- Jumper Header Header nection Coin Drop Coin Drop tion Value Present Present Present Present #2 Present #1 Present Table 26  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 87 Board "A" Vend Con- Configura- Jumper Header Header nection Coin Drop Coin Drop tion Value Present Present Present Present #2 Present #1 Present Table 26  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 88: Configuration 2 Display Test D 30

    Payment Sys- Dipswitch 2 Gravity Drain Heater Ena- tem Present 240 Volt Sup- Configuration (ON) bled (ON) (ON) Energy Cycle ply (ON) Value Table 27  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 89: Configuration 5 Display Test D 33

    1. Be certain control is in Ready Mode or Start Mode and access low for all tests in the Factory Test. panel or coin vault is open. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 90: To Exit Factory Test

    XX is the number of the keypad being PAXX pressed. You need to press all keypads to advance to the next step. Table 28  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 91 The control will not advance to next step until drum is empty. RPM speed displayed Spin Test Machine will attempt to spin up to 1200 RPMs. XXXX Table 28  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 92 Cycling power to the machine is the only way to resume normal operation and the control will stay in this state indefinitely until that time. Table 28 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 93: Error Codes

    The value in at least one of the programming options is invalid or out of range. Re- EC05 Range Data check the programming option’s value and try again. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 94 E door ing A Running Cy- door while locked or about to lock. Correct inoperative door locking system. Unpower machine to clear error. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 95 Try cycling power to machine. If error continues, check for damage to Machine ID En 39 Machine ID Con- Control and harness and/or replace Machine ID Control with a correctly configured trol Machine ID Control. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 96 Clear Fatal Error Network command must be sent. This error is triggered when an un- safe high water level is detected in the machine and water is unable to drain. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 97 Continuity should be uniform between phases L1 and L2, L2 and L3, L1 and L3. Replace motor if not uniform. Replace drive board if error persists. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 98 Door Lock Select Hardware failure. Unpower to clear error. Replace drive board if error persists. E d 53 Voltage Pin HW On/Off Fail Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 99 E d 63 ature Short Error Fatal IPM Temper- Hardware failure. Unpower to clear error. Replace drive board if error persists. E d 64 ature Open Error © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 100: Rapid Advance Feature

    NOTE: The Rapid Advance option must be turned on for Rapid Advance to work. How to Exit Rapid Advance Feature Advance through the cycle until reaching the Ready Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 101: Clear Vend Feature

    Blankets Cold cycle keypad with the other hand. The control will reset to the Ready Mode and clear out the current vend that has been entered. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 102: Power Fail Recovery

    START (enter) keypad will flash one second on and one second off until it is pressed. The cycle will restart from the point it left off when START (enter) is pressed. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 103: Communications Mode

    The washer control can be pro- grammed and have its data read without using the keypad. NOTE: Network communication is available on models with Serial Numbers beginning 1706. © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 104: Default Cycle Time

    Rinse 2 (Active with Mod2 Fill 2:00 only) Agitate 0:35 Extract Hot, Warm, Cold = 4:20 Blankets Cold, Delicate Warm, Delicate Cold = 4:05 Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...
  • Page 105 Delicate Warm, Delicate Cold = 7:20 Shakeout Agitate 0:40 Total Time Hot, Warm, Cold = 30:00 Blankets Cold = 25:00 Delicate Warm, Delicate Cold = 26:00 © Copyright, Alliance Laundry Systems LLC - Part No. 806147ENR3 DO NOT COPY or TRANSMIT...

Table of Contents