Alliance Laundry Systems HFNKCASG116TN01 Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. HFNKCASG116TN01
  6. Manual
Alliance Laundry Systems HFNKCASG116TN01 Manual

Alliance Laundry Systems HFNKCASG116TN01 Manual

Frontload washer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Original Instructions
Keep These Instructions for Future Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
Frontload Washer
Refer to Page 9 for Model Identification
Insert
Wash
Rinse
Spin
Coins/Card
Hot
Warm
Cold
Blankets
Delicate
Delicate
Cold
Warm
Cold
Extra
Extra
Wash
Rinse
Door
START
FLW2433N_SVG
Part No. 807880EN
March 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HFNKCASG116TN01 and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems HFNKCASG116TN01

Summary of Contents for Alliance Laundry Systems HFNKCASG116TN01

  • Page 1 Frontload Washer Refer to Page 9 for Model Identification Insert Wash Rinse Spin Door Coins/Card Warm Cold START Blankets Delicate Delicate Cold Warm Cold Extra Extra Wash Rinse FLW2433N_SVG Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No.
  • Page 3 Read all instructions before using unit. Hazardous voltage inside. Disconnect power before serv- icing. This product uses FreeRTOS V7.2.0 (www.freertos.org). © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 4: Regulatory Statements

    Users of this product are cautioned not to make modifications or firmware-limited to Channel 1 through 11. changes that are not approved by Alliance Laundry Systems, LLC. Doing so may void the compliance of this product with ap- CANADA - CAN ICES-3(B)/NMB-3(B) plicable laws and regulatory requirements and may result in the loss of the user’s authority to operate the equipment.
  • Page 5 Article 12 The low-power radio-frequency devices must not be altered by changing the frequency, enhancing emission power, adding external antenna, and modification of original design characteristic as well as function. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 6: Table Of Contents

    Closing Washer Door..................16 Signals......................16 © Copyright 2021, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher.
  • Page 7 Vend Price Decimal Point Ats dP..............41 Coin 1 Value dEn 1..................41 Coin 2 Value dEn 2..................41 Serial Payment Configuration SErPAy............41 Card Enable CardEn..................42 Start Pulse Value PLSE..................42 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 8 How to Program Cycle Modifier Extra Wash Additional Wash Time CNP 4... 64 How to Program Cycle Modifier Extra Rinse Additional Rinse Time CNP 7...64 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 9 Service Door Opening Test d 8..............85 Coin Vault Opening Test d 9...............85 Coin Drop 1 Input Test d 10............... 85 Coin Drop 2 Input Test d 11................85 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 10 How to Clear Vend..................101 Power Fail Recovery................102 Communications Mode............... 103 Near Field Communications.................103 Card Reader Communications - Card Models Only........103 Network Communications................103 Default Cycle Time ................104 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 11: Model Identification

    Model Identification Model Identification Information in this manual is applicable to these washer models: HFNKCASG116TN01 HFNKCASP116TW01 HFNKCASG116TW01 HFNKYASG116CN01 HFNKCASP116TN01 HFNKYASP116CN01 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 12: Preliminary Information

    The control can be programmed and have its data read without using the keypad. It may also be used to start and stop verious diagnostic tests. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 13: Control Identification

    1. LED Light 2. SELECT CYCLE pads 3. Six 7-Segment Digits 4. Display 5. LED Status Lights 6. START pad 7. SELECT Cycle Modifier pads Figure 1 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 14: Display Identification

    During diagnostic testing or manual programming of the control, these digits will display descriptive codes and values. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 15: Washer Operation

    Any coin entered after the first fill cle will begin. completes will be added to the total coin counter, but the user will not be able to change cycles. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 16: Closing Washer Door

    Start Mode will be exited and the control will enter Start Mode. Pause/Resume Mode (Enable/Disable) parameter is programmed to Enabled and if the control is in Run Mode or Door Locking Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 17: Auto Flush Mode

    OPL cycle and the cycle is not able to automatically resume. If the user presses any key, Start Mode is entered. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 18: Special Features

    These modes include Manual Programming, Audit Collection, * Tests can only be entered when in Start or Ready Mode. Diagnostics, Rapid Advance, and Reset to Factory Defaults. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 19: Special Vend

    Refer to Error Codes for more details on errors, their displays, and their priorities. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 20: Opening The Service Door

    “white/black” and “red/blue” wires. This will allow the user to access various programming options, diagnostics, and audit capa- bilities. Refer to Figure 3 . © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 21 Opening the Service Door FLW31R_SVG FLW32R_SVG W521I_SVG FLW6R_SVG1 1. Service Door 2. Control Panel Figure 3 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 22: Entering The Manual Mode

    8. To exit, press the Delicate Warm ( < ) keypad. The control will revert back to Ready Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 23 "MAC" Press the START (enter) MAC Address keypad to read MAC. Press the START (enter) "DiSCon" keypad to disconnect from SSID. Disconnect State TLW58R-b_SVG © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 24: Programming Control

    Serial Payment Config- Disabled (0), Serial (1), SErPAy uration Card (2), Start Pulse Card Enable on/oFF CardEn Start Pulse Value 1 - 65,535 PULSE Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 25 1507032557 Water Leak Detection — — E Ld- Error Menu Water Leak Detection oFF, 3 - 255 E Ld 1 Day of Week Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 26 Agitate Steps Real Time Clock Menu — — rtC- Set Real Time Clock — 0 - 59 rtC 1 Minutes Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 27 Hour Special Vend 1 Start oFF, 1 - 31 SP1 4 Date Special Vend 1 Start oFF, 1 - 12 SP1 5 Month Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 28 SP1 25 Modifier Key #1 Extra Wash Options Special Vend 1 Cycle 0 - 31 SP1 26 Modifier Key #2 Extra Rinse Options Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 29 1 - 7 bAL At tempts with No Loss of 1506011826 = 4 Time Starting Serial No. 1506011827 = 7 Cycle Pause Resume on/oFF CyCPAU Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 30 — oPL- OPL Mode Enable on/oFF oPL 1 OPL Delayed Start on/oFF oPL 2 OPL Display Power on/oFF oPL 3 Save Out of Order on/oFF © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 31 Vend Price Decimal Point "dEn 1" Coin #1 Value "dEn 2" Coin #2 Value "SErPAy" Serial Payment Configuration "CardEn" Card Enable continued FLW208R_SVG Figure 4 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 32 "E nF-" "E nF 1" No Water Flow Error No Water Flow Error "E nF 2" No Water Flow Error Time continued FLW111R_SVG Figure 5 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 33 Display Sequence "E Sd- " "E Sd 1" Slow Drain Slow Drain Detection Detection Error "E Sd 2" Slow Drain Detection Adjust continued FLW106R_SVG Figure 6 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 34 "FL Hi" High Water Level "FLSH t" Flush Out Time for Fill Steps "norF t" No Refill After Time for Agitate Step continued FLW104R_SVG Figure 7 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 35 Start Hour "dLS 6" End Month "dLS 7" End Day of Week "dLS 8" End Week of Month "dLS 9" End Hour continued FLW112R_SVG Figure 8 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 36 "SP1 14" Special Vend 1 Price #4 "SP1 15" Special Vend 1 Price #5 "SP1 16" Special Vend 1 Price #6 continued FLW113R_SVG Figure 9 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 37 Hold Step Custom Message #1 Custom Messages "PCyCtd" "CMESS2" Cycle Time Custom Message #2 Display Enable "nCyCtd" No Cycle Time Display continued FLW114R_SVG Figure 10 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 38: Vend Price 1 Ats 1

    OPL Mode Enable (On/Off) "oPL 2" OPL Delayed Start (On/Off) "oPL 3" "oUt " OPL Display Power Save (On/Off) Out of Order FLW209R_SVG Figure 11 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 39: Vend Price 2 Ats 2

    Cold is selected. Warm. This vend price will be shown in the display when Deli- cate Warm is selected. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 40: Vend Price 6 Ats 6

    START (en- ter) keypad to enter the value of the digit and advance to the next digit. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 41: Vend Price Decimal Point Ats Dp

    Press the START (enter) keypad and tion without changing the value, press the Delicate AtS H will appear in the display Warm (<) keypad. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 42: Card Enable Carden

    5. Press the Cold (∧) or the Delicate Cold (∨) keypad to increase or decrease the value of the active digit and the START (en- © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 43: Start Pulse Mode Plsnod

    The new value is saved and the next op- Start Mode is entered tion will appear in the display. Programmable Output Type AtyPE Table 3  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 44: Default Cycle Dftcyc

    6. Press the START (enter) keypad when the correct value ap- pears in the display. The new value is saved and the next op- tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 45: How To Program The Audio Signal

    Entering the number “1” in step 5 Serial or Net- work Vending Command Coin/Card In- Signal Value Start Mode Signal End of Cycle Key Pressed Table 5  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 46: Network Node Number Node

    1. Control must be in Manual Mode. Refer to How to Enter the Manual Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 47 4 inch level is reached. No Water Flow Error Time - Time al- E nF 2 lowed in minutes to reach a 4 inch fill level. Table 6  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 48 Shown after the door is opened or a key is pressed. This error will remain displayed until another key has been pressed or one minute passes. Table 6  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 49: Low Water Level Fl Lo

    FL Lo appears in the 1. Control must be in Manual Mode. Refer to How to Enter the display. Manual Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 50: Medium Water Level Fl Ned

    1. Control must be in Manual Mode. Refer to How to Enter the Manual Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 51: Set Daylight Savings Time Dls

    Press the START (enter) keypad, and through the programmable options. Refer to Table 8 . AtS 1 will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 52: How To Read The Days Enable Value Table

    * The default value programmed at the factory is 0. tion will appear in the display. SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 53 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 54 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 55 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 56 Programming Control SP1 1, E Ld 1 and LUC 1 VALUE THUR ON/OFF Table 9  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 57: How To Program Special Vend 1 Start Minute Sp1 2

    3. Press the Cold (∧) or the Delicate Cold (∨) keypad to increase or decrease the start month to the desired month. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 58: How To Program Special Vend 1 Length In Hours Sp1 7

    3. Press the Cold (∧) or the Delicate Cold (∨) keypad to increase or decrease the value to the desired month. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 59: How To Program Special Vend 1 Vend Price 4 Sp1 14

    15 appears in the display. 2. When SP1 15 appears in the display, press the START (en- ter) keypad. The current value will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 60: How To Program Special Vend 1 Wash Status Agitate Steps Subtracted Minutes Sp1 21

    1. Press the Cold (∧) or the Delicate Cold (∨) keypad to scroll ter) keypad. The current value will appear in the display. through the programmable Special Vend 1 options until SP1 26 appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 61: Special Vend 2 Days Enable Sp2

    CNP 2 appears in the appears in the display. Press the START (enter) keypad, and display. AtS 1 will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 62 State set to State set to Configuration cles set to Rinse 1 set to Wash Nod 2 Nod 1 Value 3 *** Table 11  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 63: How To Program Cycle Modifier Extra Rinse Key #2 Options Cnp 3

    7. Press the Cold (∧) or the Delicate Cold (∨) keypad to change through the programmable options until CNP- appears in the the configuration value. display. Refer to Table 11 for the value definitions. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 64: How To Program Cycle Modifier Extra Wash Additional Wash Time Cnp 4

    5. Press the Cold (∧) or the Delicate Cold (∨) keypad to scroll then press the Hot key pad. through the programmable options until CNP 7 appears in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 65 Step 50 up a location. Step 50 is reset as an invalid step. Table 12 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 66: Programming The Fill Step Type

    3-255 Motor Off Time (seconds) PAUSE XXFi10 Rotation Speed SPEEd XXFi11 no rot, LoW Ag, rEg Reversing rEvErS XXFi12 rEv on, no rEv Table 13 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 67: Programming The Supply Step Type

    External Output #2 oUtP 2 XXSU20 oFF, on External Output #3 oUtP 3 XXSU21 oFF, on External Output #4 oUtP 4 XXSU22 oFF, on Table 14 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 68 Step 2 Agitate Step Step 3 Supply Step Acts as own step Step 4 Fill Step Step 5 Supply Step Active with Step 4 Table 16 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 69: Programming The Agitate Step Type

    External Output #2 oUtP 2 XXAg16 oFF, on External Output #3 oUtP 3 XXAg17 oFF, on External Output #4 oUtP 4 XXAg18 oFF, on Table 17 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 70: Programming The Soak Step Type

    External Output #2 oUtP 2 XXSo16 oFF, on External Output #3 oUtP 3 XXSo17 oFF, on External Output #4 oUtP 4 XXSo18 oFF, on Table 18 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 71: Programming The Drain Step Type

    External Output #2 oUtP 2 XXdr11 oFF, on External Output #3 oUtP 3 XXdr12 oFF, on External Output #4 oUtP 4 XXdr13 oFF, on Table 19 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 72: Programming The Extract Drain (Spin) Step Type

    For example, if spinning at a rate of 600 RPMs, the ma- chine will start ramping down when 25 seconds remain in the current step. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 73: Programming The Audio Step Type

    External Output #2 oUtP 2 XXAU07 oFF, on External Output #3 oUtP 3 XXAU08 oFF, on External Output #4 oUtP 4 XXAU09 oFF, on Table 21 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 74: Programming The Hold Step Type

    In both cases a Start key press will al- this functionality by setting the steps as Mod 1 or Mod 2. Refer to low the cycle to resume. Cycle Modifier Programming CNP-. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 75: Hold Step Custom Messages Cness

    1. Control must be in Manual Mode. Refer to How to Enter the for the normal allocated time. Further attempts beyond the pro- Manual Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 76: Cycle Pause Resume Cycpau

    1. Control must be in Manual Mode. Refer to How to Enter the This option allows the owner to enable or disable allowing the Manual Mode. control to be read by an external device. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 77: Factory Test Ft En

    Press the START (enter) keypad, and through the programmable options until oPL- appears in the AtS 1 will appear in the display. display. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 78: Opl Mode Enable Opl 1

    Press the START (enter) keypad, and 4. When oPL- appears in the display, press the START (enter) AtS 1 will appear in the display. keypad to enter the OPL submenu. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 79 6. Press the START (enter) keypad when the correct value ap- pears in the display. The new value is saved and the next op- tion will appear in the display. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 80: Collecting Audit Information

    Total Number of Start Pulses PULSE Total Number of Rapid Ad- rAPCyC vance Cycles Total Number of Run Hours rUnHrS Resettable Coin #1 Count rCoin1 Table 24  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 81: Manual Reset

    6 Cycle 7 rCyC 7 Cycle 8 rCyC 8 Cycle 9 rCyC 9 All Cycles ALLCyC All Cycles and Global Pro- gramming Parameters Table 25 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 82: Testing Machine And Electronic Control Functions

    Coin Drop #2 Input Test d 11 C2 -- Vend Header Present Status Test CH oP (Open) or CH CL (Closed) d 12 Table 26  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 83 Machine Configuration #3 Display Test d 31 C --- Machine Configuration #4 Display Test d 32 d --- Machine Configuration #5 Display Test d 33 E --- Table 26 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 84: Diagnostic Test Descriptions

    Machine Configuration #4 Door Lock Switch Display Test Input Test "d 33" Machine Configuration #5 "d 17" Show Fill Display Test Time Test FLW107R_SVG Figure 12 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 85: Control Software Version Number Test D 1

    Testing Mode. Refer to How to Enter Testing Fea- the Testing Mode. Refer to How to Enter Testing Feature at the ture at the beginning of this section. beginning of this section. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 86: Door Switch Input Test D 15

    Ld and the START (enter) keypad LED will flash. Begin the test dr XXX. The XXX will be the average fill time in seconds. by pressing START (enter). If the door is open, CLoSE, door © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 87: Water Level Test D 26

    XXX. X which is the voltage in 0.1 Volt precision. To exit the DC Bus Voltage Test, press the Delicate Warm (<) keypad. The control will return to the Testing Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 88 Board "A" Vend Con- Configura- Jumper Header Header nection Coin Drop Coin Drop tion Value Present Present Present Present #2 Present #1 Present Table 27  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 89 Board "A" Vend Con- Configura- Jumper Header Header nection Coin Drop Coin Drop tion Value Present Present Present Present #2 Present #1 Present Table 27  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 90: Configuration 2 Display Test D 30

    Payment Sys- Dipswitch 2 Gravity Drain Heater Ena- tem Present 240 Volt Sup- Configuration (ON) bled (ON) (ON) Energy Cycle ply (ON) Value Table 28  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 91: Configuration 5 Display Test D 33

    1. Be certain control is in Ready Mode or Start Mode and access low for all tests in the Factory Test. panel or coin vault is open. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 92: To Exit Factory Test

    XX is the number of the keypad being PAXX pressed. You need to press all keypads to advance to the next step. Table 29  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 93 The control will not advance to next step until drum is empty. RPM speed displayed Spin Test Machine will attempt to spin up to 1200 RPMs. XXXX Table 29  continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 94 Cycling power to the machine is the only way to resume normal operation and the control will stay in this state indefinitely until that time. Table 29 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 95: Error Codes

    Break-in Alarm Check the service door and coin vault switches. ALArn Error Break-in Alarm Check the service door and coin vault switches. Shutdown Error Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 96 (default 15 minutes). In the event of a drain error, the control will turn off all outputs and turn on the Machine Error Tone for 15 seconds. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 97 To clear this error one of the following must occur: the machine must be pow- ered down, the Clear Fatal Error Keys must be pressed, or a Clear Fatal Error Network command must be sent. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 98 If the harness looks fine and the error still occurs, try replacing the drive board or harness. Unpower to clear error. Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 99 E d 63 ature Short Error Fatal IPM Temper- Hardware failure. Unpower to clear error. Replace drive board if error persists. E d 64 ature Open Error © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 100: Rapid Advance Feature

    NOTE: The Rapid Advance option must be turned on for Rapid Advance to work. How to Exit Rapid Advance Feature Advance through the cycle until reaching the Ready Mode. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 101: Clear Vend Feature

    Blankets Cold cycle keypad with the other hand. The control will reset to the Ready Mode and clear out the current vend that has been entered. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 102: Power Fail Recovery

    START (enter) keypad will flash one second on and one second off until it is pressed. The cycle will restart from the point it left off when START (enter) is pressed. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 103: Communications Mode

    This network link allows an owner to program, collect data and run diagnostics on any machine. © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

  • Page 104: Default Cycle Time

    Rinse 2 (Active with Mod2 Fill 2:00 only) Agitate 0:35 Extract Hot, Warm, Cold = 4:20 Blankets Cold, Delicate Warm, Delicate Cold = 4:05 Table continues... © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...
  • Page 105 Delicate Warm, Delicate Cold = 7:20 Shakeout Agitate 0:40 Total Time Hot, Warm, Cold = 30:00 Blankets Cold = 25:00 Delicate Warm, Delicate Cold = 26:00 © Copyright, Alliance Laundry Systems LLC - Part No. 807880EN DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Hfnkcasp116tw01Hfnkcasg116tw01Hfnkyasg116cn01Hfnkcasp116tn01Hfnkyasp116cn01

Table of Contents