Table of Contents
Advertisement
Available languages
Available languages
12. Specifications
Point of impact
Repetition rate
Light intensity
Wavelength
Required wiring
Operation Conditions
Temperature
Relative Humidity
Atmospheric Pressure
Storage and Transportation Conditions
(device only)
Temperature
Relative Humidity
Atmospheric Pressure
14. Electromagnetic Compatibility Conformance
1. * This product needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided, and this unit can be
affected by portable and mobile RF communications equipment.
2. * Do not use a mobile phone or other devices that emit electromagnetic fields, near
the unit. This may result in incorrect operation of the unit.
3. * Caution: This unit has been thoroughly tested and inspected to assure proper
performance and operation!
4. * Caution: This machine should not be used adjacent to or stacked with other
equipment, and that if adjacent or stacked use is necessary, this machine should be
observed to verify normal operation in the configuration in which it will be used.
At level 1, one pulse every 1.6 seconds.
At level 5, one pulse every 3.5 seconds.
550 - 1200 nm (when using with body lens)
600 - 1200 nm (when using with facial lens)
Body lamp: 4.0 cm²
Facial lamp: 2.0 cm ²
At level 1: 2.0 J/cm²
At level 2: 3.0 J/cm²
At level 3: 3.5 J/cm²
At level 4: 4.0 J/cm²
At level 5: 4.5 J/cm²
100 - 240 VAC, 3.5 A
+10°C to +35°C
30% to 75%
700 to 1060hPa
-40°C to +70°C
30% to 75%
500 to 1060hPa
51
Advertisement
Table of Contents
