Coverage Of The Treatment Area; Facial Depilation With The Lumilisse® Hair Remover - Conair Lumilisse G960 Series Instructions Manual

NOTE:
• If you remove the Lumilisse® Hair Remover from your skin while holding down the trigger
button, it will stay in Glide mode for 5 seconds. However, for your own safety, the pulsed
light will only be released if the Lumilisse® Hair Remover is in full contact with your skin.
You should ensure that the application surface of the Lumilisse® Hair Remover is in full
contact with your skin in order to allow it to glide.
• If the application surface of the Lumilisse® Hair Remover is not in full contact with your skin,
you will have 5 seconds in which to ensure that the Lumilisse® Hair Remover is in full con-
tact, while holding down the trigger button. If that window of 5 seconds is exceeded and
there is still not complete contact with the skin, Glide mode will be deactivated and then
you release the trigger button and press it again to reactivate Glide mode.
• If you lift up the unit and release the trigger, Glide mode will be deactivated.
Glide mode is suitable for people who already have some experience and proficiency
when using the Lumilisse® Hair Remover . With 36 pulses per minute (at level 1), Glide
mode provides safe and fast treatment of larger areas of the body (legs, back, arms, torso).
For sensitive areas, the face and for the first few times using the Lumilisse® Hair Remover,
you should use Precision mode.

6.5 Coverage of the treatment area

For proper coverage of the treatment area, the light pulses need to be applied to your skin
in lines, from one extremity to the other, systematically continuing in successive lines. This
prevents the side effects caused by overlapping of the light pulses.
The imprints left on your skin by the pressure from the application surface of the Lumilisse®
Hair Remover should help you to align yourself correctly to apply each new pulse, to avoid
pulses overlapping or, on the other hand, to avoid the pulses being spaced too far apart.
Helpful hint: Some people find it helpful to use a white eyeliner to draw a grid pattern on
the body part to be depilated. Do not use any color other than pure white.
6.6 Facial depilation with the Lumilisse® Hair Remover
Depilating the face needs very special attention because the skin on the face is particular-
ly delicate and sensitive. This is why the Lumilisse® Hair Remover is equipped with a special
facial attachment. The special facial attachment is targeted and extremely precise, limiting
the light spectrum for treatment that is appropriate for sensitive facial skin.
Safety precautions for facial depilation:
• The Lumilisse® Hair Remover is only suitable for depilating the lower
part of the face (cheeks, upper lip and chin).
• The Lumilisse® Hair Remover is not suitable for depilating eyelashes,
hair and eyebrows.
• Do not look at the area of skin being treated while the light pulses are
being released. Close your eyes while the pulses are being emitted. If
the bright light is uncomfortable, we suggest wearing sunglasses.
• Do not use the Lumilisse® Hair Remover around the eyes.
• Do not shave the different areas of the face before use.
• You must use the special facial attachment to depilate the face using the
Lumilisse® Hair Remover.
45