Conair GMT235WGBC Instruction Booklet

fig. A
until you become familiar with the adjustments, use the
longest trim setting (5/8"). (You can always go back and
make your beard a little shorter.)
3. This will give you the longest "cut", for shorter "cuts" ,
place thumb on the center of the top of the cutting guide,
pushing forward to obtain 1/8"-
5/8" (see fig. B).
Your GMT235WGBC comes with
an optional 5-position pivoting
head. This feature allows you to
trim those hard to reach facial
contours. To use this feature:
1.) Pick up your GMT235WGBC with the front of the
trimmer facing you. Using your other hand simply push
in at the bottom of the upper head. Push in and set the
head to one of the settings (the unit comes prepackaged
at the first setting, you then have four other settings you
can adjust your trimmer to). It will take some time to get
used to your own personal setting so try each one until
you find what works for you. As you try these settings
you will feel how comfortable this makes trimming your
beard or mustache.
2.) If you do not wish to use this feature just leave the
trimmer as it was when it came out of the package.
3.) Begin trimming your beard using smooth, even
strokes. Start with your side-
burns and work downward
toward your chin. (Never attempt
to trim against the natural growth
of your beard because the hair
will be cut too short.)
4.) If you decide you want a closer trim, you can now
adjust the 5-position comb attachment to a shorter set-
ting and go over your beard again until you achieve the
desired length.
blendIng the JawlIne
1. The three jawline
attachments
help you to achieve
a neat, finished trim
under your chin.
To use one of the
attachments, press it down over the trimmer blades until
it clicks into position.
2. Hold the trimmer in an upright position and begin
trimming under your jawline, using short, even strokes.
3. After your beard is blended, turn off the trimmer and
fig. B
remove the attachment by gently pulling up on tab.
to trIm your muStache
1. For best results, start with a clean, slightly
damp mustache.
2. Comb through your mustache in the direction
it grows.
back and cut your mustache more closely with a shorter
setting.)
alwayS trIm your muStache
4. After your mustache has been trimmed to the desired
length, remove the 5-position comb and, using the blades
only, define the outline of the bottom of your mustache.
This versatile trimmer comes with 4 heads so facial
hair styles can be changed as often as you like. It also
has a special taper control feature, which allows you to
have the 2 day shave look 365 days a year. To achieve
will
I
II
3. Place the 5-position comb
over the trimmer blades and
snap it into position. It is a
good idea to start with the
longest trim setting adjust-
ment. (You can always go
from the top down
this look, simply put your trimmer blade to the lowest
setting.
Other great features include a small shaver head for
precise facial detailing on sideburns and goatees. A
wide facial hair blade with two 5-position adjustable
combs makes beard and mustache trimming quicker
and easier. The small detailing blade works for creating
"soul patches" as well as a nose and ear hair trimmer.
Congratulations on owning a great, new professional
grade trimmer.
III

battery removal

CONTAINS NICKEL CADMIUM
BATTERY. MUST BE
COLLECTED, RECYCLED OR
DISPOSED OF PROPERLY.
DO NOT DISPOSE OF IN
THE MUNICIPAL WASTE.
1. Using a small Phillips head screwdriver, remove
the screws at the bottom of the trimmer.
2. Remove the battery cap and push the battery out.
Bring the battery to the nearest collection center for
proper disposal. DO NOT throw the battery into the
normal municipal waste system.