Table of Contents
Advertisement
Available languages
Available languages
• The Lumilisse® Hair Remover is not suitable for treating men's beards.
• For your comfort and safety, we recommend that you have someone help you use the
Lumilisse® Hair Remover on your face for the first few sessions, once they have familiar-
ized themselves with the instruction manual.
• NOTE: The Glide mode is not available for facial depilation.
• You must wait 5 seconds between each pulse of light when using the device on the face.
Any facial depilation session with the Lumilisse® Hair Remover must not last any longer
than 10 minutes.
Positioning the special facial attachment
To fit or remove the facial attachment, the device must be switched off and unplugged.
Gently grasp the facial attachment between the thumb and index finger to fit or remove it.
NOTE: Remove the facial attachment and place the body attachment on the Lumilisse®
Hair Remover appliance to treat legs, back and arms.
WARNING: Hot surfaces. Do not touch the application surface of the facial attachment
with your fingers.
NOTE: The Lumilisse® Hair Remover has a system to protect your eyes, a contact sensor
that prevents the unit from releasing a pulse if its application surface is not in full
contact with your skin. If the unit is not in full contact with your skin, it will not release
a pulse of light. Make sure, therefore, that the application window touches your skin
on all sides so that the safety contact sensors are touching your skin on all sides around
the flash lens.
7. After using the Lumilisse® Hair Remover
NOTE: The Lumilisse® Hair Remover will turn off automatically if you do not use
the device for more than 10 minutes. The ON/OFF button is now orange. To use the
Lumilisse® Hair Remover again, you have to press the ON/OFF button and select the
required level of intensity again.
7.1 Switching off the Lumilisse® Hair Remover
At the end of your depilation session, switch off the Lumilisse® Hair Remover by pressing
the ON/OFF button.
Unplug the adapter from the power outlet.
Storage: When not in use, your device should be disconnected and stored in a safe, dry
location out of the reach of children.
7.2 Cleaning
We recommend that you clean the Lumilisse® Hair Remover, especially the application
window, before every depilation session. Do not clean after use because the unit may
be hot.
• Unplug the Lumilisse® Hair Remover before cleaning.
• Gently clean the casing of the Lumilisse® Hair Remover and especially the application
surface, using a clean, dry cloth. Do not use harsh chemicals.
• After cleaning, store the Lumilisse® Hair Remover in its original box in a dry, safe place.
• Never immerse your Lumilisse® Hair Remover, or any of its parts in water.
7.3 Caring for the skin following an epilation session with the Lumilisse® Hair Remover
46
Advertisement
Table of Contents
