Remove The Flexiblelom; Install The Storage Controller - HP ProLiant BL660c Gen9 User Manual

Remove the mezzanine assembly.
5.

Remove the FlexibleLOM

Power down the server blade (on page 12).
1.
Remove the server blade (on page 13).
2.
Place the server blade on a flat, level work surface.
3.
Remove the access panel (on page 14).
4.
Remove the mezzanine assembly (on page 19).
5.
Use the FlexibleLOM handle to remove the FlexibleLOM from the system board.
6.

Install the storage controller

Power down the server blade (on page 12).
1.
Operations 20