Advertisement
Orient and align the AD Light Guard (3) as shown.
Slip-in the Spacer –Delrin M5 14x3(5) – 2 off from
either side.
Slide-in the Washer M5 (4) and Screw M5 x 25 (10)
–2off, into the top side of the mounting hole, from
either sides.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
2
Take off Original Screws, and Windshield.
2
Mounting of the Bottom Plate (11).This takes the
mounting hole available in the Motorbike (as
shown in the drawing).
Orient and align the Bottom Plate, and slide in,
Bush Delrin M5 8x11 (9) – 2 off, and and Screw M5
x 25 (10) –2off, and Hex flange nut M5 (8)- 2 off,
from the Bottom side.
2
2
2
Page 3
Advertisement
