SRC H-X-ADV-21-04-01 Quick Start Manual

Scope of Supply/Bill of Material & Mounting Drawings

Part Number: H-X-ADV-21-04-01 / H-X-ADV-21-04-02

Part Description: Top Rack –HONDA X-ADV 750 2021

Installation / Parts List / Bill of Material for Mounting

NO.

T op Rack

Bottom Plat

Bush M6 18x10

Bush M8 18x10

Socket countersunk head Screw M6x20

Cou ntersunk Washer M6

Socket countersunk head Screw M8x30

Cou ntersunk Washer M8

SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters

* Recommended to use the Torque specified in the table

**Deno tes Usage of Liquid Thread Locker in specified Locations

Design and Specification are subjected to change

Description

Quantity

T orque * (N-M)

Use Liquid Thread Locker

9.6

Use Liquid Thread Locker

Rema rks **

Chack List

Page 1

Table of Contents

Need help?

Do you have a question about the H-X-ADV-21-04-01 and is the answer not in the manual?

Page 1 Use Liquid Thread Locker Cou ntersunk Washer M8 SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the Torque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
Page 2 MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3 Mounting The Screw M8x30 (7) 4 off and Bush M8 18x10 (4) 4 off, on each side and secure the threads. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4 Bush M6x10 (3) 4 off through the Mounting holes in the Top Rack and, tighten it to the torque . Rear Rack as shown “Final Assembled condition” Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5 50 kilo meters of ride and at regular intervals. 7. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC 8. To the maximum extent possible, our design use the current Mounting/Fitment of the...

H-x-adv-21-04-02