Advertisement
Step – 1
During the First stage of the
assembly and mounting, the
Mounting Bracket and Stack
plates can be assembled Off-
line (as shown in the drawing)
All the Parts in the Oil Tank Set
Assembly, Except (3) (Knob)
and (5)(Oil Tank), all the other
parts can be assembled Off-
line.
Insert the M5 Washers and M5
x 25 Screws {(7) & (8)} from the
rear side of the Mounting
Bracket (1) as Identified by
"Red" points in the drawing
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Page 3
Advertisement
