Page 1
5 - 6 AD B Head Lig h t Guard SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the Torque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
Bush Delrin M5 8x11 (9) – 2 off, and and Screw M5 x 25 (10) –2off, and Hex flange nut M5 (8)- 2 off, from the Bottom side. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Ensure Mounting symmetry and tighten the screws to torque as per specifications in the BOM table. Final Mounted condition of the Head Light Guard, is as shown in the drawing above. Copyright By SRC Design and Specification are subjected to change Page 4...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.