Advertisement
Step: 1
Slip-in the Special Pin (3) – 5 off,
as shown into the mounting holes.
These special pins, are made out
of Rubber, which act as cushions.
The projections, have threads, to
suit the Mounting threads in the
Underside of the Engine.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
The Underside of the Engine,
before mounting of the Skid Plate
(Engine Guard), looks like, as
shown in the drawing.
The 5 Mounting Holes (Front 2
holes at an Angular orientation,
and the back 3 at a Horizontal
orientation) can be seen, which
will be used for mounting the
Engine Guard.
Page 3
Advertisement
