Advertisement
Step 2:
Orient and Align the Bracket RH (2) and
Bracket LH (3), as shown in-line with the
Mounting points in the drawing.
Slip-in Washer M5 (4) – 2 off on each side
and Screw M5 x 20 (6) – 2 off on each side.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 1:
The 2 off screws as shown in Red colour from
the mounting points, has to be removed from
Right-hand and Left-hand side, and kept
aside.
The Mounting points, will be used for
mounting the Bracket RH and LH with SRC's
scope of Mounting fasteners, which will be
explained in subsequent steps.
Page 3
Advertisement
